IRF8010S Datasheet, PDF (10/10 Pages) International Rectifier – SMPS MOSFET

IRF8010S/IRF8010L
D²Pak Tape & Reel Information
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
TRL
10.90 (.429)
10.70 (.421)
1.60 (.063)
1.50 (.059)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
1.75 (.069)
1.25 (.049)
16.10 (.634)
15.90 (.626)
0.368 (.0145)
0.342 (.0135)
24.30 (.957)
23.90 (.941)
4.72 (.136)
4.52 (.178)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
Notes:
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
 Repetitive rating; pulse width limited by max. junction ^{† C}oss ^{eff. is a fixed capacitance that gives the same}
temperature.
charging time as C_oss while V_DS is rising from 0 to 80%
‚ Starting T_J = 25°C, L = 0.31mH, R_G = 25Ω, I_AS = 45A.
V_DSS.
ƒ I_SD ≤ 45A, di/dt ≤ 110A/µs, V_DD ≤ V_(BR)DSS, T_J ≤ 175°C. _{‡ Calculated continuous current based on maximum}
„ Pulse width ≤ 300µs; duty cycle ≤ 2%.
allowable junction temperature. Package limitation
… Rth(jc) (end of life) is the maximum measured value
current is 75A.
after 1000 temperature cycles from -55 to 150°C and
ˆ When mounted on 1" square PCB ( FR-4 or G-10
is accounted for by the physical wearout of the die attach
medium in worse case PCB mounting condition of
material (solder/substrate), process and re-flow
Material ). For recommended footprint and soldering
techniques refer to application note #AN-994.
temperature.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: [phone]
TAC Fax: [phone]
Visit us at www.irf.com for sales contact information.01/03
10
www.irf.com