SC105 Datasheet, PDF (1/5 Pages) International Rectifier – SCHOTTKY DIE 105 x 125 mils

SCHOTTKY DIE 105 x 125 mils
Bulletin I0503J 12/99
SC105.....5. Series
a
0.35 ± 0.01
c
(0.14 ± 0.0004)
C
A
D
Ø
Wafer flat alligned with
side b of the die
40 (1.57)
NOTES:
1. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS (INCHES).
2. CONTROLLING DIMENSION: (INCH).
3. DIMENSIONS AND TOLERANCES:
a = 3.18 + 0, - 0.05
(0.125 + 0, - 0.002)
b = 2.67 + 0, - 0.05
(0.105 + 0, - 0.002)
c = 3.02 + 0, - 0.003
(0.119 + 0, - 0.0001)
d = 2.51 + 0, - 0.003
(0.099 + 0, - 0.0001)
Ø = 0.7 ± 0.1
(0.03 ± 0.004)
4. LETTER DESIGNATION:
A = Anode (Top Metal)
C = Cathode (Back Metal)
D = Reject Ink Dot (only on non-conforming dies)
5. SAWING:
Recommended Blade
SEMITEC S1025 QS00 Blade
Ø 125 (4.92)
NOT TO SCALE
NOTE: 10 mils die thickness is available on specific request only.
Contact factory for information.
www.irf.com
1