OM4212SM Datasheet, PDF (1/2 Pages) International Rectifier – ISOLATED SURFACE MOUNT POWER SCHOTTKY CENTER-TAP RECTIFIER

ISOLATED SURFACE MOUNT POWER
SCHOTTKY CENTER-TAP RECTIFIER
Hermetic Surface Mount Package
10 Amp, 45 Volt Schottky Center-Tap
OM4212SM
FEATURES
• Hermetic Surface Mount Package
• Very Low Forward Voltage
• Low Recovery Charge
• High Efficiency For Low Voltage Supplies
• 45V Blocking @ Rated T_jmax
• 50V Repetitive Surge Voltage
• Center-Tap Configuration
• Available Hi-Rel Screened
DESCRIPTION
This series of surface mount devices offer two Schottky barriers arranged in a
common cathode configuration and is ideally suited for a full wave output rectifier in
low voltage switching power supplies where small size and high reliability are
required. Common anode configuration also available.
ABSOLUTE MAXIMUM RATINGS (T_c=25°C)Per Diode
Peak Inverse Voltage.............................................................................................45 V
Maximum Average D.C. Output Current..................................................................5 A
Peak Surge Current (Non-Repetitive, 8.3mS) .......................................................60 A
Peak Reverse Transient Current .........................................................................1.0 A
Storage Temperature Range .........................................................- 55° C to + 175° C
Junction OperatingTemperature Range .........................................- 55° C to + 150° C
Package Thermal Resistance, Junction-to-Case ..........................................2.5° C/W
SCHEMATIC
PIN CONNECTION
12
13
2₃
COMMON CATHODE
Contact factory for common anode,
common cathode is standard.
1₂
1³
2₃
Pin 1: DC
Pin 2: AC
Pin 3: AC
Case: Isolated
3.5
4 11 R1
Supersedes 1 05 R0
3.5 - 67