IRS2308_15 Datasheet, PDF (1/21 Pages) International Rectifier – HALF-BRIDGE DRIVER

DS No.PD60266 Rev A
IRS2308^(S)PbF
HALF-BRIDGE DRIVER
Features
Packages
• Floating channel designed for bootstrap operation
• Fully operational to +600 V
• Tolerant to negative transient voltage, dV/dt
immune
• Gate drive supply range from 10 V to 20 V
• Undervoltage lockout for both channels
• 3.3 V, 5 V, and 15 V input logic compatible
• Cross-conduction prevention logic
• Matched propagation delay for both channels
8-Lead SOIC
IRS2308S
• Outputs in phase with inputs
• Logic and power ground +/- 5 V offset.
• Internal 540 ns deadtime
• Lower di/dt gate driver for better
Feature Comparison
noise immunity
Description
Cross-
Part
Input
logic
conduction
prevention
logic
Deadtime
(ns)
8-Lead PDIP
IRS2308
Ground Pins
Ton/Toff
(ns)
The IRS2308/IRS23084 are high volt-
age, high speed power MOSFET and
IGBT drivers with dependent high and
2106
21064
2108
21084
HIN/LIN
HIN/LIN
no
none
COM
VSS/COM
yes
Internal 540
COM
Programmable 540 - 5000 VSS/COM
220/200
220/200
low side referenced output channels.
Proprietary HVIC and latch immune
CMOS technologies enable ruggedized
monolithic construction. The logic input
2109
21094
2304
2308
IN/SD
HIN/LIN
HIN/LIN
yes
Internal 540
COM
Programmable 540 - 5000 VSS/COM
yes
Internal 100
COM
yes
Internal 540
COM
750/200
160/140
220/200
is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high
pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used
to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 V.
Typical Connection
V_CC
up to 600 V
V_CC
V_B
HIN
HIN
HO
LIN
LIN
V_S
COM
LO
TO
LOAD
(Refer to Lead Assignments for correct pin configuration). This diagram shows electrical connections only.
Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
1