IRS2184 Datasheet, PDF (1/26 Pages) International Rectifier – HALF-BRIDGE DRIVER

Data Sheet No. PD60252
IRS2184^/IRS21844(S)PbF
Features
HALF-BRIDGE DRIVER
Packages
• Floating channel designed for bootstrap operation
• Fully operational to +600 V
• Tolerant to negative transient voltage, dV/dt immune
• Gate drive supply range from 10 V to 20 V
8-Lead PDIP
IRS2184
• Undervoltage lockout for both channels
• 3.3 V and 5 V input logic compatible
14-Lead PDIP
• Matched propagation delay for both channels
IRS21844
• Logic and power ground +/- 5 V offset
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4 A/1.8 A
8-Lead SOIC
IRS2184S
14-Lead SOIC
IRS21844S
• RoHS compliant
Description
The IRS2184/IRS21844 are high volt-
age, high speed power MOSFET and Feature Comparison
IGBT drivers with dependent high-side
Cross-
and low-side referenced output chan-
Part
Input
logic
conduction
prevention
nels. Proprietary HVIC and latch
logic
Deadtime
(ns)
Ground Pins
ton/toff
(ns)
immune CMOS technologies enable
2181
HIN/LIN
no
none
COM
180/220
21814
VSS/COM
ruggedized monolithic construction.
The logic input is compatible with stan-
2183
21834
HIN/LIN
yes
Internal 400
Program 400-5000
COM
VSS/COM
180/220
dard CMOS or LSTTL output, down to 3.3
V logic. The output drivers feature a
2184
21844
IN/SD
yes
Internal 400
COM
680/270
Program 400-5000
VSS/COM
high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be
used to drive an N-channel power MOSFET or IGBT in the high-side configuration which operates up to 600 V.
Typical Connection
V_CC
V_CC
V_B
IN
IN
HO
SD
SD
V_S
COM LO
up to 600 V
TO
LOAD
IRS2184
V_CC
IN
SD
(Refer to Lead Assignments for correct
configuration).These diagrams show
electrical connections only. Please refer
V_SS
to our Application Notes and DesignTips
for proper circuit board layout.
HO
V_CC
V_B
IN
V_S
SD
DT
V_SS
COM
R_DT
LO
up to 600 V
IRS21844
TO
LOAD
www.irf.com
1