IRS2183_15 Datasheet, PDF (1/24 Pages) International Rectifier – HALF-BRIDGE DRIVER

Data Sheet No. PD60265
IRS2183/IRS21834(S)PbF
Features
HALF-BRIDGE DRIVER
• Floating channel designed for bootstrap operation
• Fully operational to +600 V
• Tolerant to negative transient voltage, dV/dt
Packages
immune
• Gate drive supply range from 10 V to 20 V
• Undervoltage lockout for both channels
• 3.3 V and 5 V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5 V offset
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4 A/1.8 A
• RoHS compliant
8-Lead PDIP
IRS2183
14-Lead PDIP
IRS21834
Description
The IRS2183/IRS21834 are high voltage,
8-Lead SOIC
IRS2183S
14-Lead SOIC
IRS21834S
high speed power MOSFET and IGBT
drivers with dependent high-side and ^{Feature Comparison}
low-side referenced output channels.
Proprietary HVIC and latch immune
CMOS technologies enable ruggedized
monolithic construction. The logic input
is compatible with standard CMOS or
LSTTL output, down to 3.3 V logic. The
output drivers feature a high pulse cur-
rent buffer stage designed for minimum
Part
2181
21814
2183
21834
2184
21844
Input
logic
HIN/LIN
HIN/LIN
IN/SD
Cross-
conduction
prevention
logic
no
yes
yes
Deadtime
(ns)
none
Internal 400
Program 400-5000
Internal 400
Program 400-5000
Ground Pins
COM
VSS/COM
COM
VSS/COM
COM
VSS/COM
ton/toff
(ns)
180/220
180/220
680/270
driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT
in the high-side configuration which operates up to 600 V.
Typical Connection
up to 600 V
V_CC
V_CC
V_B
HIN
HIN
HO
LIN
LIN
V_S
TO
LOAD
COM LO
up to 600 V
IRS2183
V_CC
HIN
LIN
(Refer to Lead Assignment for correct pin
configuration) These diagrams show electrical
V_SS
connections only. Please refer to our Application
Notes and DesignTips for proper circuit board layout.
HO
V_CC
V_B
HIN
V_S
LIN
DT
V_SS
COM
R_DT
LO
IRS21834
TO
LOAD
www.irf.com
1