IRS2136 Datasheet, PDF (1/23 Pages) International Rectifier – 3-PHASE BRIDGE DRIVER

PRELIMINARY
Data Sheet No. PD60272
IRS2136/IRS21362/IRS21363/IRS21365/
IRS21366/IRS21367/IRS21368 (J&S) PbF
3-PHASE BRIDGE DRIVER
Features
• Floating channel designed for bootstrap operation
• Fully operational to +600 V
• Tolerant to negative transient voltage, dV/dt immune
• Gate drive supply range from 10 V to 20 V (IRS2136/
IRS21368), 11.5 V to 20 V (IRS21362), or 12 V to 20 V
(IRS21363/IRS21365/IRS21366/IRS21367
• Undervoltage lockout for all channels
• Over-current shutdown turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• Cross-conduction prevention logic
• Low side output out of phase with inputs. High side outputs
out of phase (IRS213(6,63, 65, 66, 67, 68)), or in phase
(IRS21362) with inputs
• 3.3 V logic compatible
• Lower di/dt gate drive for better noise immunity
• Externally programmable delay for automatic fault clear
• All parts are LEAD-FREE
Packages
28-Lead SOIC
28-Lead PDIP
44-Lead PLCC w/o 12 Leads
Applications:
*Motor Control
*Air Conditioners/ Washing Machines
*General Purpose Inverters
*Micro/Mini Inverter Drives
Description
The IRS2136x are high voltage, high
speed power MOSFET and IGBT driver with
Feature Comparison: IRS2136x
three independent high side and low side
referenced output channels for 3-phase
applications. Proprietary HVIC technology
Part
Input Logic
IRS2136
___ ___
HIN, LIN
IRS21362
___
HIN, LIN
IRS21363
___ ___
HIN, LIN
IRS21365
___ ___
HIN, LIN
IRS21366
___ ___
HIN, LIN
IRS21367
___ ___
HIN, LIN
IRS21368
___ ___
HIN, LIN
enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or
LSTTL outputs, down to 3.3 V logic. A current
trip function which terminates all six outputs
can be derived from an external current sense
resistor. An enable function is available to
terminate all six outputs simultaneously. An
open-drain FAULT signal is provided to
ton (typ.)
toff (typ.)
VIH (min.)
VIL (max.)
VITRIP+
VCCUV+/
VBSUV+
VCCUV-/
VBSUV-
530 ns
530 ns
2.5 V
0.8 V
0.46 V
8.9 V
8.2 V
530 ns
530 ns
2.5 V
0.8 V
0.46 V
10.4 V
9.4 V
530 ns
530 ns
2.5 V
0.8 V
0.46 V
11.1 V
10.9 V
530 ns
530 ns
2.5 V
0.8 V
4.3 V
11.1 V
10.9 V
200 ns
200 ns
2.5 V
0.8 V
0.46 V
11.1 V
10.9 V
200 ns
200 ns
2.5 V
0.8 V
4.3 V
11.1 V
10.9 V
530 ns
530 ns
2.5 V
0.8 V
4.3 V
8.9 V
8.2 V
indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a
delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer
stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications.
The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to
600 V.
Typical Connection
www.irf.com
1