IRPT1059 Datasheet, PDF (1/12 Pages) International Rectifier – Integrated Power Stage for 1hp Motor Drives

PD 6.103
PRELIMINARY
IRPT1059
ΤΜ
Integrated Power Stage for 1 hp Motor Drives
· 1 hp (0.75kW) power output
Industrial rating at 150% overload for 1 minute
· 180 - 240V AC single-phase input, 50/60Hz
· Available as complete system or as sub-system
assemblies
Power Module
· Single-phase rectifier bridge
· 3-phase short circuit rated, ultrafast IGBT inverter
· Low inductance (current sense)
shunts in positive and negative DC rail
· NTC temperature sensor
· Pin-to-base plate isolation 2500V rms
· Easy-to-mount two-screw package
· Case temperature range -25°C to 125°C operational
Driver-Plus Board
· DC bus capacitor filter with NTC inrush
current limiter
· IR2132 monolithic 3-phase HVIC driver
· On-board +15V and +5V power supply
· MOV surge suppression at input
· DC bus voltage and current feedback
· Protection for short-circuit, earth/ground fault and
overtemperature
· Terminal blocks for single-phase input and output
connections
180 - 240V
IRPT1059C
single-phase input
Figure 1. The IRPT1059C
control system
within a motor
www.irf.com
page 1