IRMCF188_15 Datasheet, PDF (1/38 Pages) International Rectifier – High Performance Sensorless Motor Control IC

IRMCF188
High Performance Sensorless Motor Control IC
Description
IRMCF188 is a high performance Flash based motion control IC designed and optimized for complete air
conditioner control which contains two computation engines integrated into one monolithic chip. One is the
Flexible Motion Control Engine (MCE^TM) for sensorless control of permanent magnet motors or induction motors;
the other is an 8-bit high-speed microcontroller (8051). The user can program a motion control algorithm by
connecting these control elements using a graphic compiler. Key components of the complex sensorless control
algorithms, such as the Angle Estimator, are provided as complete pre-defined control blocks. A unique
analog/digital circuit and algorithm fully supports single shunt or leg shunt current reconstruction. IRMCF188
performs a PFC (Power Factor Correction) function in addition to the motor control. IRMCF188 comes in a 64 pin
QFP package.
Features
• MCE^TM (Flexible Motion Control Engine) -
Dedicated computation engine for high efficiency
sinusoidal sensorless motor control
• Built-in hardware peripheral for single or two shunt
current feedback reconstruction and analog
circuits
• Supports induction machine and both interior and
surface permanent magnet motor sensorless
control
• Dedicated PFC PWM for digital PFC control
• Loss minimization Space Vector PWM
• Three-channel analog output (PWM)
• Embedded 8-bit high speed microcontroller (8051)
for flexible I/O and man-machine control
• JTAG programming port for emulation/debugger
• Serial communication interface (UART)
• I2C/SPI serial interface
• Three general purpose timers/counters
• Two special timers: periodic timer, capture timer
• Watchdog timer with independent internal clock
• Internal 64 Kbyte flash memory
• 3.3V single supply
Product Summary
Maximum clock input (f_crystal)
Maximum Internal clock (SYSCLK)
Maximum 8051 clock (8051CLK)
MCE^TM computation data range
8051 Program Flash
8051/MCE Data RAM
MCE Program RAM
GateKill latency (digital filtered)
PWM carrier frequency
A/D input channels
A/D converter resolution
A/D converter conversion speed
Analog output (PWM) resolution
UART baud rate (typ)
Number of digital I/O (max)
Package (lead free)
Typical 3.3V operating current
60 MHz
120MHz
30MHz
16 bit signed
52KB
4KB
12KB
2 μsec
20 bits/ SYSCLK
10
12 bits
2 μsec
8 bits
57.6 Kbps
24
QFP64
30mA
Base Part Number
IRMCF188
IRMCF188
Package Type
LQFP64
LQFP64
Standard Pack
Form
Quantity
Tape and Reel
1500
Tray
1600
Orderable Part Number
IRMCF188TR
IRMCF188TY
1 www.irf.com
© 2014 International Rectifier Submit Datasheet Feedback
May 28, 2014