IRMCF143_15 Datasheet, PDF (1/35 Pages) International Rectifier – High Performance Position Servo Control IC

IRMCF143
High Performance Position Servo
Control IC
Description
IRMCF143 is a high performance Flash based motion control IC designed primarily for position servo applications
based on an incremental encoder. IRMCF143 is designed to achieve low cost yet high performance control
solutions for advanced inverterized servo motor control. IRMCF143 contains two computation engines. One is the
Flexible Motion Control Engine (MCE^TM) for sinusoidal Field Oriented Control (FOC) of servo motors; the other is
an 8-bit high-speed microcontroller (8051). Both computation engines are integrated into one monolithic chip. The
MCE^TM contains a collection of control elements implemented in a dedicated computation engine such as
Proportional plus Integral, Vector rotator, Angle estimator, Multiply/Divide, and Low loss SVPWM. The user can
program a motion control algorithm by connecting these control elements using a graphic compiler. A unique
analog/digital circuit and algorithm to fully support two leg shunt current sensing is also provided. The 8051
microcontroller performs 2-cycle instruction execution (15MIPS at 30MHz 8051CLK). The MCE and 8051
microcontroller are connected via dual port RAM for signal monitoring and command input. An advanced graphic
compiler for the MCE^TM is seamlessly integrated into the MATLAB/Simulink environment, while third party JTAG-
based emulator tools are supported for 8051 software development. IRMCF143 comes in a 64 pin QFP package.
Features
 MCE^TM (Flexible Motion Control Engine) -
Dedicated computation engine for high efficiency
sinusoidal FOC control
 Built-in hardware peripheral for two shunt current
feedback reconstruction and analog circuits
 Supports incremental encoder with Hall effect
position sensor initialization
 24bit position counter
 Position capture and compare
 Pulse + Direction input
 Brake control with gatekill input
 Loss minimization Space Vector PWM
 Three-channel analog outputs (PWM)
 Embedded 8-bit high speed microcontroller (8051)
for flexible I/O and man-machine control
 JTAG programming port for emulation/debugger
 Serial communication interface (UART)
 I2C/SPI serial interface
 Three general purpose timers, one capture timer
 Watchdog timer with independent internal clock
 Internal 64 Kbyte flash memory
 3.3V single supply
Product Summary
Maximum clock input (f_crystal)
Maximum Internal clock (SYSCLK)
Maximum 8051 clock (8051CLK)
FOC computation time
MCE^TM computation data range
8051 Program Flash
8051/MCE Data RAM
MCE Program RAM
GateKill latency (digital filtered)
PWM carrier frequency
A/D input channels
A/D converter resolution
A/D converter conversion speed
Analog output (PWM) resolution
UART baud rate (typ)
Encoder interface
Number of digital I/O (max)
Package (lead free)
60MHz
120MHz
30MHz
35 μsec@100MHz
16 bit signed
52KB
4KB
12KB
2 μsec
20 bits/ SYSCLK
8
12 bits
2 μsec
8 bits
57.6K bps
6
22
QFP64
Ordering Information
Orderable Part Number
IRMCF143TR
IRMCF143TY
Package Type
LQFP64
LQFP64
Standard Pack
Form
Quantity
Tape and Reel
1500
Tray
1600
1 www.irf.com
© 2015 International Rectifier
February 4,2015