English
Language : 

IRHM7460SE Datasheet, PDF (1/4 Pages) International Rectifier – TRANSISTOR N-CHANNEL(BVdss=500V, Rds(on)=0.32ohm, Id=18.8A)
Previous Datasheet
Index
Next Data Sheet
Provisional Data Sheet No. PD-9.1394A
REPETITIVE AVALANCHE AND dv/dt RATED
HEXFET® TRANSISTOR
IRHM7460SE
N-CHANNEL
SINGLE EVENT EFFECT (SEE) RAD HARD
500 Volt, 0.32Ω, (SEE) RAD HARD HEXFET
International Rectifier’s (SEE) RAD HARD technology
HEXFETs demonstrate virtual immunity to SEE fail-
ure. Additionally, under identical pre- and post-radia-
tion test conditions, International Rectifier’s RAD HARD
HEXFETs retain identical electrical specifications up
to 1 x 105 Rads (Si) total dose. No compensation in
gate drive circuitry is required.These devices are also
capable of surviving transient ionization pulses as high
as 1 x 1012 Rads (Si)/Sec, and return to normal opera-
tion within a few microseconds. Since the SEE pro-
cess utilizes International Rectifier’s patented HEXFET
technology, the user can expect the highest quality and
reliability in the industry.
RAD HARD HEXFET transistors also feature all of the
well-established advantages of MOSFETs, such as volt-
age control, very fast switching, ease of paralleling and
temperature stability of the electrical parameters.
They are well-suited for applications such as switching
power supplies, motor controls, inverters, choppers,
audio amplifiers and high-energy pulse circuits in space
and weapons environments.
Product Summary
Part Number
BVDSS
IRHM7460SE
500V
RDS(on)
0.32Ω
ID
18.8A
Features:
n Radiation Hardened up to 1 x 105 Rads (Si)
n Single Event Burnout (SEB) Hardened
n Single Event Gate Rupture (SEGR) Hardened
n Gamma Dot (Flash X-Ray) Hardened
n Neutron Tolerant
n Identical Pre- and Post-Electrical Test Conditions
n Repetitive Avalanche Rating
n Dynamic dv/dt Rating
n Simple Drive Requirements
n Ease of Paralleling
n Hermetically Sealed
n Electrically Isolated
n Ceramic Eyelets
Absolute Maximum Ratings
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
Parameter
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current 
Max. Power Dissipation
Linear Derating Factor
VGS
EAS
IAR
EAR
dv/dt
Gate-to-Source Voltage
Single Pulse Avalanche Energy ‚
Avalanche Current 
Repetitive Avalanche Energy 
Peak Diode Recovery dv/dt ƒ
TJ
TSTG
Operating Junction
Storage Temperature Range
Lead Temperature
Weight
Pre-Radiation
IRHM7460SE
Units
18.8
11.9
A
75.2
250
W
2.0
W/K …
±20
V
500
mJ
18.8
A
25
mJ
3.5
V/ns
-55 to 150
oC
300 (0.063 in. (1.6 mm) from case for 10s)
9.3 (typical)
g
To Order