IRF6609TR1 Datasheet, PDF (1/11 Pages) International Rectifier – Low Conduction Losses

l Low Conduction Losses
l Low Switching Losses
l Ideal Synchronous Rectifier MOSFET
l Low Profile (<0.7 mm)
l Dual Sided Cooling Compatible
l Compatible with existing Surface Mount
Techniques
V_DSS
20V
PD - 95822B
IRF6609
HEXFET^® Power MOSFET
R_DS(on) max Qg
2.0mΩ@V_GS = 10V 46nC
2.6mΩ@V_GS = 4.5V
MT
Applicable DirectFET Outline and Substrate Outline (see p.8,9 for details)
DirectFET™ ISOMETRIC
SQ
SX
ST
MQ
MX
MT
Description
The IRF6609 combines the latest HEXFET® Power MOSFET Silicon technology with the advanced DirectFET^TM packaging to achieve the
lowest on-state resistance in a package that has the footprint of an SO-8 and only 0.7 mm profile. The DirectFET package is compatible
with existing layout geometries used in power applications, PCB assembly equipment and vapor phase, infra-red or convection soldering
techniques, when application note AN-1035 is followed regarding the manufacturing methods and processes. The DirectFET package
allows dual sided cooling to maximize thermal transfer in power systems, IMPROVING previous best thermal resistance by 80%.
The IRF6609 balances both low resistance and low charge along with ultra low package inductance to reduce both conduction and
switching losses. The reduced total losses make this product ideal for high efficiency DC-DC converters that power the latest generation
of processors operating at higher frequencies. The IRF6609 has been optimized for parameters that are critical in synchronous buck
operating from 12 volt buss converters including Rds(on), gate charge and Cdv/dt-induced turn on immunity. The IRF6609 offers particu-
larly low Rds(on) and high Cdv/dt immunity for synchronous FET applications.
Absolute Maximum Ratings
Parameter
Max.
Units
V_DS
Drain-to-Source Voltage
V_GS
I_D @ T_C = 25°C
I_D @ T_A = 25°C
I_D @ T_A = 70°C
I_DM
P_D @T_C = 25°C
P_D @T_A = 25°C
P_D @T_A = 70°C
Gate-to-Source Voltage
i Continuous Drain Current, V_GS @ 10V
Ãf Continuous Drain Current, V_GS @ 10V
f Continuous Drain Current, V_GS @ 10V
™ Pulsed Drain Current
i Power Dissipation
f Power Dissipation
f Power Dissipation
Linear Derating Factor
T_J
Operating Junction and
T_STG
Storage Temperature Range
Thermal Resistance
20
±20
150
31
25
250
89
1.8
2.8
0.022
-40 to + 150
V
A
W
W/°C
°C
R_θJA
R_θJA
R_θJA
R_θJC
R_θJ-PCB
Notes 
Parameter
fj Junction-to-Ambient
gj Junction-to-Ambient
hj Junction-to-Ambient
ij Junction-to-Case
Junction-to-PCB Mounted
through ˆ are on page 10
Typ.
–––
12.5
20
–––
1.0
Max.
45
–––
–––
1.4
–––
Units
°C/W
www.irf.com
1
10/05/05