IRAMY20UP60B Datasheet, PDF (1/16 Pages) International Rectifier – iMOTION Series 20A, 600V

PD-96955 Rev. A
IRAMY20UP60B
Series
Integrated Power Hybrid IC for
20A, 600V
Appliance Motor Drive Applications.
with Internal Shunt Resistor
Description
International Rectifier's IRAMY20UP60B is a 20A, 600V Integrated Power Hybrid IC with Internal Shunt
Resistor for Appliance Motor Drives applications such as air conditioning systems and compressor drivers as
well as for light industrial application. IR's technology offers an extremely compact, high performance AC
motor-driver in a single isolated package to simplify design.
This advanced HIC is a combination of IR's low V_CE(on) Non Punch-Through IGBT technology and the industry
benchmark 3-Phase high voltage, high speed driver in a fully isolated thermally enhaced package.
A built-in temperature monitor and over-current and over-temperature protections, along with the short-
circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-
safe operation. Using a new developed single in line package (SiP3) with heatspreader for the power die
along with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink.
Features
• Integrated Gate Drivers
• Temperature Monitor and Protection
• Overcurrent shutdown
• Fully Isolated Package
• Low VCE (on) Non Punch Through IGBT Technology.
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• 5V Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~2.2kW / 85~253 Vac
• Isolation 2000V_RMS min
Absolute Maximum Ratings
Parameter
Description
Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
RMS Phase Current (Note 1)
20
I_O @ T_C=100°C
RMS Phase Current (Note 1)
10
A
I_O
Pulsed RMS Phase Current (Note 2)
40
F_PWM
PWM Carrier Frequency
20
kHz
P_D
Power dissipation per IGBT @ T_C =25°C
68
W
V_ISO
Isolation Voltage (1min)
2000
V_RMS
T_J (IGBT & Diodes)
T_J (Driver IC)
Operating Junction temperature Range
Operating Junction temperature Range
-40 to +150
°C
-40 to +150
T
Mounting torque Range (M4 screw)
0.7 to 1.17
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=20kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=20kHz. Limited by I_BUS-ITRIP, see Table "Inverter Section Electrical Characteristics"
www.irf.com
1