IRAMX20UP60A Datasheet, PDF (1/17 Pages) International Rectifier – 20A, 600V with open Emitter Pins

PD-96956 Rev B
IRAMX20UP60A
Series
Integrated Power Hybrid IC for
Appliance Motor Drive Applications
20A, 600V
with open Emitter Pins
Description
International Rectifier's IRAMX20UP60A is a 20A, 600V Integrated Power Hybrid IC for Appliance Motor
Drives applications such air conditioning systems and compressor drivers as well as in light industrial applica-
tion. IR's technology offers an extremely compact, high performance AC motor-driver in a single isolated
package to simplify design.
This advanced HIC is a combination of IR's low V_CE(on) Punch-Through IGBT technology and the industry
benchmark 3 phase high voltage, high speed driver in a fully isolated thermally enhanced package.
A built-in temperature monitor and input logic protection function, along with the short-circuit rated IGBTs
and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation.
Using a Single in line package (SiP2) with heatspreader for the power die along with full transfer mold
structure minimizes PCB space and resolves isolation problems to heatsink.
Features
• Integrated Gate Drivers
• Temperature Monitor
• Overcurrent shutdown
• Fully Isolated Package
• Low VCE (on) Non Punch Through IGBT Technology.
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• 5V Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~1.5kW / 85~253 Vac
• Isolation 2000V_RMS min
Absolute Maximum Ratings
Parameter
Description
Max. Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
RMS Phase Current (Note 1)
20
I_O @ T_C=100°C
RMS Phase Current (Note 1)
10
A
I_O
Pulsed RMS Phase Current (Note 2)
30
F_PWM
PWM Carrier Frequency
20
kHz
P_d
Power dissipation per IGBT @ T_C =25°C
38
W
V_ISO
Isolation Voltage (1min)
2000
V_RMS
T_J (IGBT & Diodes)
T_J (Driver IC)
Operating Junction temperature Range
Operating Junction temperature Range
-40 to +150
°C
-40 to +150
T
Mounting torque Range (M3 screw)
0.5 to 0.6
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=16kHz.
www.irf.com
1