IRAMX16UP60B-2 Datasheet, PDF (1/17 Pages) International Rectifier – Integrated Power Hybrid IC for Appliance Motor Drive Applications.

PD-96-957 RevD
IRAMX16UP60B
Series
Integrated Power Hybrid IC for
16A, 600V
Appliance Motor Drive Applications.
Description
with Internal Shunt Resistor
International Rectifier's IRAMX16UP60B is a 16A, 600V Integrated Power Hybrid IC with Internal Shunt
Resistor for Appliance Motor Drives applications such as air conditioning systems and compressor drivers as
well as for light industrial application. IR's technology offers an extremely compact, high performance AC
motor-driver in a single isolated package to simplify design.
This advanced HIC is a combination of IR's low V_CE(on) Punch-Through IGBT technology and the industry
benchmark 3 phase high voltage, high speed driver in a fully isolated thermally enhanced package.
A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and
integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. Using a
Single in line package (SiP2) with full transfer mold structure minimizes PCB space and resolve isolation
problems to heatsink.
Features
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Low V_CE(on) Non Punch Through IGBT Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~2.2kW / 85~253 Vac
•
Isolation 2000V min
RMS
• UL certification pending (UL number: E78996)
Absolute Maximum Ratings
Parameter
Description
Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
RMS Phase Current (Note 1)
16
I_O @ T_C=100°C
RMS Phase Current (Note 1)
8
A
I_O
Pulsed RMS Phase Current (Note 2)
30
F_PWM
PWM Carrier Frequency
20
kHz
P_D
Power dissipation per IGBT @ T_C =25°C
31
W
V_ISO
Isolation Voltage (1min)
2000
V_RMS
T_J (IGBT & Diodes)
T_J (Driver IC)
Operating Junction temperature Range
Operating Junction temperature Range
-40 to +150
°C
-40 to +150
T
Mounting torque Range (M3 screw)
0.5 to 1.0
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=16kHz. Limited by I_BUS-ITRIP, see Table "Inverter Section Electrical Characteristics"
www.irf.com
1