IRAMX16UP60A-2 Datasheet, PDF (1/17 Pages) International Rectifier – Integrated Power Hybrid IC for Appliance Motor Drive Applications.

PD-94684 RevD
IRAMX16UP60A
Integrated Power Hybrid IC for
Appliance Motor Drive Applications.
Series
16A, 600V
Description
International Rectifier's IRAMX16UP60A is an Integrated Power Module developed and optimized for elec-
tronic motor control in appliance applications such as washing machines and variable speed compressor
drives for in-room air-conditioning systems and commercial refrigerators. Plug N Drive technology offers an
extremely compact, high performance AC motor-driver in a single isolated package for a very simple design.
An open emitter configuration of the low side IGBT switches offer easy current feedback and overcurrent
monitor for high precision and reliable control.
A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and
integrated under-voltage lockout function, deliver high level of protection and fail-safe operation.
The integration of the bootstrap diodes for the high-side driver section, and the single polarity power
supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost
reduction advantages.
Features
• Integrated Gate Drivers and Bootstrap Diodes.
• Temperature Monitor
• Temperature and Overcurrent shutdown
• Fully Isolated Package.
• Low VCE (on) Non Punch Through IGBT Technology.
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Low side IGBT emitter pins for current control
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power range 0.75~2kW / 85~253 Vac
• Isolation 2000V_RMS min
Absolute Maximum Ratings
Parameter
Description
Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
RMS Phase Current (Note 1)
16
I_O @ T_C=100°C
RMS Phase Current (Note 1)
8
A
I_O
Pulsed RMS Phase Current (Note 2)
30
F_PWM
PWM Carrier Frequency
20
kHz
P_D
Power dissipation per IGBT @ T_C =25°C
31
W
V_ISO
Isolation Voltage (1min)
2000
V_RMS
T_J (IGBT & Diodes)
T_J (Driver IC)
Operating Junction temperature Range
Operating Junction temperature Range
-40 to +150
°C
-40 to +150
T
Mounting torque Range (M3 screw)
0.5 to 1.0
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=16kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=16kHz. Limited by I_BUS-ITRIP, see Table "Inverter Section Electrical Characteristics"
www.irf.com
1