IRAMS10UP60B Datasheet, PDF (1/17 Pages) International Rectifier – Plug N DriveTM Integrated Power Module for Appliance Motor Drive

PD-95830 RevI
IRAMS10UP60B
Series
Integrated Power Hybrid IC for
10A, 600V
Appliance Motor Drive Applications.
Description
with Internal Shunt Resistor
International Rectifier's IRAMS10UP60B is an Integrated Power Module developed and optimized for elec-
tronic motor control in appliance applications such as washing machines and refrigerators. Plug N Drive
technology offers an extremely compact, high performance AC motor-driver in a single isolated package for
a very simple design. An internal shunt is also included and offers easy current feedback and overcurrent
monitor for precise and safe operation. A built-in temperature monitor and over-current protection, along
with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of
protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section,
and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the
module and deliver further cost reduction advantages.
Features
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Fully Isolated Package
• Low V_CE(on) Non Punch Through IGBT Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise
immunity
• Motor Power range 0.4~0.75kW / 85~253 Vac
• Isolation 2000V_RMS /1min and CTI > 600V
• Recognized by UL (E252584), RoHS Compliant
Absolute Maximum Ratings
Parameter
Description
Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
I_O @ T_C=100°C
I_O
F_PWM
P_D
V_ISO
T_J (IGBT & Diodes)
T_J (Driver IC)
RMS Phase Current (Note 1)
RMS Phase Current (Note 1)
Pulsed RMS Phase Current (Note 2)
PWM Carrier Frequency
Power dissipation per IGBT @ T_C =25°C
Isolation Voltage (1min)
Operating Junction temperature Range
Operating Junction temperature Range
10
5
A
15
20
kHz
27
W
2000
V_RMS
-40 to +150
°C
-40 to +150
T
Mounting torque Range (M3 screw)
0.5 to 1.0
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=20kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=20kHz. Limited by I_BUS-ITRIP, see Table "Inverter Section Electrical Characteristics"
www.irf.com
1