IRAM136-3063B_15 Datasheet, PDF (1/17 Pages) International Rectifier – Temperature Monitor and Protection

PD-97288 RevC
IRAM136-3063B
Series
Integrated Power Hybrid IC for
High Voltage Motor Applications
30A, 600V
with Internal Shunt Resistor
Description
International Rectifier's IRAM136-3063B is a 30A, 600V Integrated Power Hybrid IC with Internal Shunt
Resistor for Appliance Motor Drives applications such air conditioning systems and compressor drivers as
well as for light industrial application. IR's technology offers an extremely compact, high performance AC
motor driver in a single isolated package to simplify design.
This advanced HIC is a combination of IR's low V_CE(on) Punch-Through IGBT technology and the industry
benchmark 3-Phase high voltage, high speed driver in a fully isolated thermally enhanced package. A built-
in temperature monitor and over-current and over-temperature protections, along with the short-circuit
rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and failsafe
operation. Using a new developed single in line package (SiP3) with heat spreader for the power die along
with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink.
Features
• Integrated Gate Drivers
• Temperature Monitor and Protection
• Overcurrent shutdown
• Low V_CE(on) Advance Planar Super Rugged Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• 5V Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power up to 3.3kW / 85~253 Vdc
• Fully Isolated Package, Isolation 2000V_RMS min
Absolute Maximum Ratings
Parameter
Description
Value
Units
V_CES / V_RRM
V⁺
IGBT/Diode Blocking Voltage
Positive Bus Input Voltage
600
V
450
I_O @ T_C=25°C
Maximum Output Current
30
I_O @ T_C=100°C
RMS Phase Current (Note 1)
15
A
I_O
Pulsed RMS Phase Current (Note 2)
50
F_PWM
PWM Carrier Frequency
20
kHz
P_D
Power dissipation per IGBT @ T_C =25°C
73
W
V_ISO
Isolation Voltage (1min)
2000
V_RMS
T_J (IGBT & Diode & IC) Maximum Operating Junction Temperature
+150
T_C
Operating Case Temperature Range
-20 to +100
°C
T_STG
Storage Temperature Range
-40 to +125
T
Mounting torque Range (M4 screw)
0.7 to 1.17
Nm
Note 1: Sinusoidal Modulation at V⁺=400V, T_J=150°C, F_PWM=6kHz, Modulation Depth=0.8, PF=0.6, See Figure 3.
Note 2: t_P<100ms; T_C=25°C; F_PWM=6kHz. Limited by I_BUS-ITRIP, see Table "Inverter Section Electrical Characteristics"
www.irf.com
1