IR6220 Datasheet, PDF (1/4 Pages) International Rectifier – INTELLIGENT HIGH SIDE MOSFET POWER SWITCH

Previous Datasheet
Index
Next Data Sheet
Preliminary Data Sheet 6.049
IR6220
INTELLIGENT HIGH SIDE MOSFET POWER SWITCH
Features
• PWM Current Limit for Short Circuit Protection
• Over-Temperature Protection
• Active Output Negative Clamp
• Reverse Battery Protection
• Broken Ground Protection
• Short to VCC Protection
• Low Noise Charge Pump
• Sleep Mode Supply Current
• 4kV ESD Protection On All Pins
• Logic Ground Isolated From Power Ground
V_cc(op)
R_ds(on)
I_lim
T_j(sd)
E_av
5v-50v
100mΩ
10A
170°C
200mJ
General Description:
The IR6220 is a 5 terminal monolithic HIGH SIDE SWITCH
with built in short circuit, over- temperature, ESD, inductive load
turn off capability and diagnostic feedback.
Applications
• Solenoid Driver
• DC Motor Driver
The on-chip protection circuit goes into PWM mode, limiting the Truth Table
average current during short circuit if the drain current exceeds
5A. The protection circuit latches off the high side switch if the Condition
In
Out
Dg
junction temperature exceeds 170°C and latches on after the junc- _Normal
tion temperature falls by 10°C. The drain to source voltage is
actively clamped at 55V, improving its performance during turn
Normal
H
H
H
L
L
L
off with inductive loads.
Output Open
H
H
H
The on-chip charge pump high side driver stage is floating and ref- ^OutputOpen
L
H
H
erenced to the source of the power MOSFET. Thus the logic to
Shorted Output
H Current-Limiting L
power ground isolation can be as high as 50V. This allows opera-
tion with larger offset as well as controlling the switch during
Shorted Output
L
L
L
load energy recirculation or regeneration.
Over-Temperature H
L
L
A diagnostic pin is provided for status feedback of short circuit, ^{Over-Temperature L}
L
L
over temperature and open load detection.
Block Diagram
Available Packages
To Order
IR6220
TO-220
(5-lead)