IR3598_15 Datasheet, PDF (1/21 Pages) International Rectifier – Dual/Doubler Interleaved MOSFET Driver

Dual/Doubler Interleaved MOSFET Driver
IR3598
FEATURES
 Dual MOSFET drivers in single 16 pin QFN
package
 Buck Converter Driver Vin 4.0 to 13.2Vdc
 Multimode operation to configure the driver
as either dual or doubler/interleaved mode
drivers
 Variable Gate drive from 4V to 13V to
optimize system efficiency
 5V VCC and VDRV capability for sleep states
where only 5V is available
 Large drivers designed to drive 3nF in < 12ns
with any voltage from 5V to 12V (typ)
supplied to the VDRV pin
 Low side driver – 0.85Ω source/0.38Ω sink
 High side driver – 1.1Ω source/0.60Ω sink
 Propagation delays < 20ns
 Integrated bootstrap diode on both drivers
 Capable of high output switching frequencies
from 150kHz up to greater than 1MHz
 Compatible with IR’s patented Active
Tri‐Level (ATL) PWM for fastest response to
transient overshoot as well as industry
standard 3.3V and 5V Tri‐State signals in
most modes
 Non‐overlap and under voltage protection
 Thermally enhanced 16 pin QFN package
 Lead free RoHS compliant package
 Low Quiescent power to optimize efficiency
DESCRIPTION
The IR3598 is a high‐efficiency dual driver capable of switching
a pair of high and low side N‐channel MOSFETs in synchronous
buck converters and is optimized for use with IR’s Digital PWM
controllers to provide a total voltage regulator solution for today’s
advanced computing applications. In a space saving 16‐pin QFN
package, the IR3598 can significantly improve density in high
phase count voltage regulators saving over 50% board space
versus conventional drivers.
The IR3598 can be configured as two independent drivers in DUAL
mode with individual PWM signals, or as an interleaved DOUBLER
driver where one PWM signal is internally split to drive the two
pairs of MOSFETs 180° out of phase. The inter‐leaving action is
optimized internally to manage the tri‐state action of multiple
phases during transients, low current single phase operation, and
PS2 operation (see Figs. 8 and 9.) The DOUBLER mode can double
the effective maximum phase count from the controller, enabling
a well‐controlled, high phase count voltage regulator.
The IR3598 has a proprietary circuit which maintains the MOSFET
drive strength throughout the 4.0V to 13.2V drive voltage range
thus insuring fast switching even with 5V standby drive operation
during system sleep modes. The integrated boot diodes reduce
external component count. The IR3598 also features an adaptive
non‐overlap control for shoot‐through protection.
The IR3598 PWM inputs are compatible with IR’s fast Active
Tri‐Level (ATL) PWM signals as well as 3.3V and 5V Tri‐State
PWM signals.
APPLICATIONS
 Desktop CPU and GPU solutions
 Performance overclocking CPU and GPU VR solutions
 Optimized for Sleep state S3 systems using +5VSB
BASIC APPLICATION
PIN DIAGRAM
Figure 1: IR3598 Typical DOUBLER Mode
Application Circuit
1 October 25, 2013 | FINAL | V1.12
Figure 2: IR3598 Package Top View