IR3566A_15 Datasheet, PDF (1/4 Pages) International Rectifier – Dual Output Digital Multi-Phase Controller

Dual Output Digital Multi-Phase Controller _IR3566A
FEATURES
 Dual output 6+1 phase PWM Controller
 Fully supports AMD® SVI1 & SVI2 with dual
OCP and Intel® VR12
 PVI and SVI GPU VR modes
 Overclocking & Gaming Mode
 Switching frequency from 200kHz to 2MHz
per phase
 IR Efficiency Shaping Features including
Dynamic Phase Control and Automatic Power
State Switching
 Programmable 1-phase operation for Light
Loads and Active Diode Emulation for Very
Light Loads
 IR Adaptive Transient Algorithm (ATA) on both
loops minimizes output bulk capacitors and
system cost
 Auto-Phase Detection with auto-compensation
 Per-Loop Fault Protection: OVP, UVP, OCP,
OTP
 I2C/SMBus/PMBus system interface for
telemetry of Temperature, Voltage, Current &
Power for both loops
 Multiple Time Programming (MTP) with
integrated charge pump for easy custom
configuration
 Compatible with IR ATL and 3.3V tri-state
Drivers
 +3.3V supply voltage; -40°C to 85°C ambient
operation
 Pb-Free, RoHS, 6x6mm, 48-pin, 0.4mm pitch
QFN
DESCRIPTION
The IR3566A is a dual-loop digital multi-phase buck
controller designed for CPU voltage regulation and is
fully compliant with AMD® SVI1 & SVI2 and Intel^©
VR12 specifications.
The IR3566A includes IR’s Efficiency Shaping
Technology to deliver exceptional efficiency at
minimum cost across the entire load range. IR Variable
Gate Drive optimizes the MOSFET gate drive voltage
based on real-time load current. IR’s Dynamic Phase
Control adds/drops active phases based upon load
current and can be configured to enter 1-phase
operation and diode emulation mode automatically or
by command.
IR’s unique Adaptive Transient Algorithm (ATA), based
on proprietary non-linear digital PWM algorithms,
minimizes output bulk capacitors and Multiple Time
Programmable (MTP) storage saves pins and enables
a small package size. Device configuration and fault
parameters are easily defined using the IR Digital
Power Design Center (DPDC) GUI and stored in on-
chip MTP.
The IR3566A provides extensive OVP, UVP, OCP and
OTP fault protection and includes thermistor based
temperature sensing with VRHOT signal.
The IR3566A includes numerous features like register
diagnostics for fast design cycles and platform
differentiation, simplifying VRD design and enabling
fastest time-to-market (TTM) with “set-and-forget”
methodology.
APPLICATIONS
 AMD® SVI1 & SVI2, Intel® VR12 based systems
 Servers and High End Desktop CPU VRs
 High Performance Graphics Processor
ORDERING INFORMATION
Base Part
Number
IR3566A
Package Type
QFN 6 mm x 6 mm
Standard Pack
Form
Quantity
Tape and Reel
3000
Orderable
Part Number
IR3566AMxxyyTRP¹
IR3566A
QFN 6 mm x 6 mm
Tape and Reel
3000
IR3566AMTRPBF
IR3566A
QFN 6 mm x 6 mm
Tray
4900
IR3566AMTYPBF
Notes:
1. Customer Specific Configuration File, where xx = Customer ID and yy = Configuration File (Codes assigned by IR Marketing).
1 www.irf.com | © 2013 International Rectifier | Product Brief |
October 1, 2013 | V3.04