IR22381QPBF Datasheet, PDF (1/30 Pages) International Rectifier – 3-PHASE AC MOTOR CONTROLLER IC

Data Sheet PD60232 revC
IR22381QPBF/IR21381Q(PbF)
3-PHASE AC MOTOR CONTROLLER IC
Features
• Floating channel up to +600V or +1200V
• “soft” over-current shutdown turns off desaturated output
• Integrated desaturation circuit
• Active biasing on sensing desaturation input
• Two stage turn on output for di/dt control
• Integrated brake IGBT driver with protection
• Voltage feedback sensing function
• Separate pull-up/pull-down output drive pins
• Matched delay outputs
• Under voltage lockout with hysteresis band
• Programmable deadtime
• Hard shutdown function
Description
The IR22381Q and IR21381Q are high voltage, 3-phase IGBT
driver best suited for AC motor drive applications. Integrated
desaturation logic provides all mode of overcurrent protection,
including ground fault protection. The sensing desaturation input is
provided by active bias stage to reject noise. Soft shutdown is
predominantly initiated in the event of overcurrent followed by turn-
off of all six outputs. A shutdown input is provided for a customized
shutdown function. The DT pin allows external resistor to program
the deadtime. Output drivers have separate turn on/off pins with
two stage turn-on output to achieve the desired di/dt switching level
of IGBT. Voltage feedback provides accurate volt x second
measurement.
Product Summary
V_OFFSET (max)
I_{O +/-} (min.)
V_OUT
Brake (I_{O +/-} min.)
Deadtime Asymmetry
Skew (max.)
Deadtime (typ. with
RDT=39KΩ)
DESAT Blanking time (typ.)
DESAT filter time (typ.)
Active bias on Desat input
pin
DSH, DSL input voltage
threshold (typ.)
Soft shutdown duration
time (typ.)
Voltage feedback matching
delay time (max.)
Package
600V or 1200V
220mA / 460mA
12.5V-20V
40mA/80mA
125nsec
1µsec
4.5µsec
3.0µsec
90Ω
8.0V
6.0µsec
400nsec
64-Lead MQFP w/o 13 leads
Typical Connection
15V
VCC
VB1,2,3
3
DSH1,2,3
LIN1,2,3
3
HIN1,2,3
HOP1,2,3
FAULT
BRIN
HOQ1,2,3
SD
HON1,2,3
U
VFH1,2,3
V
VFL1,2,3
VS1,2,3
W
DSB
DSL1,2,3
(Refer to Lead
Assignments for
correct pin
configuration. This
diagram shows
electrical
connections only)
BR
DT
VSS
LOP1,2,3
LOQ1,2,3
LON1,2,3
COM
1