|
IR2237 Datasheet, PDF (1/12 Pages) International Rectifier – 3-PHASE BRIDGE DRIVER | |||
|
Data Sheet No. PD60170-G
IR2137/IR2237(J)(Q)
Features
3-PHASE BRIDGE DRIVER
⢠Floating channel up to +600V or +1200V
⢠âsoftâ over-current shutdown turns off all six
Product Summary
outputs
⢠Integrated high side desaturation circuit
⢠Controlled âsoftâ turn on for EMI reduction
⢠Integrated brake IGBT driver
⢠Three independent low side COM pins
⢠Separate pull-up/pull-down output drive pins
VOFFSET
IO+/-
VOUT
Brake Io+/-
600V max. or 1200V max.
220mA / 460mA
12.5V - 20V
40mA/80mA
⢠Matched delay outputs
⢠3.3V logic compatible
⢠Under voltage lockout with hysteresis band
Matched delay
Deadtime (typ.)
75nsec
300 nsec
Description
DESAT Blanking time (typ.)
2.0usec
The IR2137/IR2237(J)(Q) are a high voltage, high
speed 3-phase IGBT driver best suited for AC motor
drive applications. Integrated desaturation logic pro-
DESAT input voltage
threshold (typ.)
Vt+ = 5.0V
vides ground fault protection as well as other mode of
over current protection. Soft shutdown is initiated in Packages
the event of any overcurrent/ground fault conditions,
and all six outputs are simultaneously turned off. Out-
put drivers have separate turn on/off pins to facilitate
independent gate drive impedance with EMI soft turn
on. Optimum matched delays between phases, and
between high/low side enables small deadtime, thus
improving low speed performance. The brake driver
eliminates additional circuits.
64-Lead MQFP
68-Lead PLCC
Typical Connection
DC
BUS
15V
3
3
uP,Control
3
GND
VCC
LIN1,2,3
HIN1,2,3
SD
FAULT
FLTCLR
ITRIP
2137/
2237
VB1,2,3
HOP1,2,3
HON1,2,3
HSSD1,2,3
DESAT1,2,3
VS1,2,3
BRIN
LOP1,2,3
BR
COM
VSS
LON1,2,3
LSSD1,2,3
LS1,2,3
Current Feedback
W
V Motor
U
(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only.
Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
1
|
▷ |