IR2183STRPBF Datasheet, PDF (1/22 Pages) International Rectifier – HALF-BRIDGE DRIVER

Data Sheet No. PD60173 rev.H
IR2183⁽4^)(S) & ^(PbF)
Features
• Floating channel designed for bootstrap operation
Fully operational to +600V
Tolerant to negative transient voltage
dV/dt immune
• Gate drive supply range from 10 to 20V
• Undervoltage lockout for both channels
• 3.3V and 5V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5V offset.
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4A/1.8A
• Also available LEAD-FREE (PbF)
HALF-BRIDGE DRIVER
Packages
8-Lead PDIP
IR2183
14-Lead PDIP
IR21834
8-Lead SOIC
IR2183S
14-Lead SOIC
IR21834S
Description
The IR2183(4)(S) are high voltage,
high speed power MOSFET and IGBT
drivers with dependent high and low
side referenced output channels. Pro-
prietary HVIC and latch immune
IR2181/IR2183/IR2184 Feature Comparison
Part
2181
21814
Input
logic
HIN/LIN
Cross-
conduction
prevention
logic
no
Dead-Time
none
Ground Pins
Ton/Toff
COM
VSS/COM
180/220 ns
CMOS technologies enable rugge-
dized monolithic construction. The
2183
21834
HIN/LIN
yes
Internal 500ns
Program 0.4 ~ 5 us
COM
VSS/COM
180/220 ns
logic input is compatible with standard
2184
21844
IN/SD
yes
Internal 500ns
Program 0.4 ~ 5 us
COM
VSS/COM
680/270 ns
CMOS or LSTTL output, down to 3.3V
logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction.
The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration
which operates up to 600 volts.
Typical Connection
V_CC
V_CC
V_B
HIN
HIN
HO
LIN
LIN
V_S
COM
LO
IR2183
V_CC
HIN
LIN
(Refer to Lead Assignment for correct pin
configuration) This/These diagram(s) show
V_SS
electrical connections only. Please refer to our
Application Notes and DesignTips for proper circuit
board layout.
up to 600V
TO
LOAD
HO
V_CC
V_B
HIN
V_S
LIN
DT
V_SS
COM
R_DT
LO
IR21834
up to 600V
TO
LOAD
www.irf.com
1