IR2181STRPBF Datasheet, PDF (1/21 Pages) International Rectifier – HIGH AND LOW SIDE DRIVER

Data Sheet No. PD60172 Rev.G
IR2181⁽4^{)(S) & (PbF)}
HIGH AND LOW SIDE DRIVER
Features
• Floating channel designed for bootstrap operation
Fully operational to +600V
Tolerant to negative transient voltage
dV/dt immune
• Gate drive supply range from 10 to 20V
• Undervoltage lockout for both channels
• 3.3V and 5V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5V offset.
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4A/1.8A
• Also available LEAD-FREE (PbF)
Packages
8-Lead PDIP
IR2181
8-Lead SOIC
IR2181S
14-Lead PDIP
IR21814
14-Lead SOIC
IR21814S
IR2181/IR2183/IR2184 Feature Comparison
Description
The IR2181(4)(S) are high voltage,
high speed power MOSFET and IGBT
drivers with independent high and low
side referenced output channels. Pro-
prietary HVIC and latch immune
CMOS technologies enable rugge-
Part
2181
21814
2183
21834
2184
21844
Input
logic
HIN/LIN
HIN/LIN
IN/SD
Cross-
conduction
prevention
logic
no
yes
yes
Dead-Time
Ground Pins
none
Internal 500ns
Program 0.4 ~ 5 us
Internal 500ns
Program 0.4 ~ 5 us
COM
VSS/COM
COM
VSS/COM
COM
VSS/COM
Ton/Toff
180/220 ns
180/220 ns
680/270 ns
dized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to
3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-
conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side
configuration which operates up to 600 volts.
Typical Connection
V_CC
V _CC
V_B
HIN
HIN
HO
LIN
LIN
V_S
COM
LO
IR2181
(Refer to Lead Assignments for correct pin
configuration). This/These diagram(s) show
electrical connections only. Please refer to
our Application Notes and DesignTips for
proper circuit board layout.
up to 600V
TO
LOAD
HO
V_CC
V_CC
V_B
HIN
HIN
V_S
LIN
LIN
V_SS
V_SS
COM
LO
IR21814
up to 600V
TO
LOAD
www.irf.com
1