English
Language : 

IR2130D_15 Datasheet, PDF (1/21 Pages) International Rectifier – 3-PHASE DRIVER
PD-60022D
IR2130D
Features
n Hermetic
n Floating channel designed for bootstrap operation
Fully operational to +400V
Tolerant to negative transient voltage
dV/dt immune
n Gate drive supply range from 10 to 20V
n Undervoltage lockout for all channels
n Over-current shutdown turns off all six drivers
n Independent half-bridge drivers
n Matched propagation delay for both channels
n Outputs in phase with inputs
Description
The IR2130D is a high voltage, high speed power MOSFET
and IGBT driver with three independent high and low side
referenced output channels. Proprietary HVIC technology
enables ruggedized monolithic construction. Logic inputs
are compatible with 5V CMOS or LSTTL outputs. A ground-
referenced operational amplifier provides analog feedback
of bridge current via an external current sense resistor. A
current trip function which terminates all six outputs is also
derived from this resistor.
3-PHASE DRIVER
Product Summary
VOFFSET
400V max.
IO+/-
100mA / 100mA
VOUT
10 - 20V
ton/off (typ.) 675ns & 425ns
Deadtime (typ.)
0.9µs
An open drain FAULT signal indicates if an over-
current or undervoltage shutdown has occurred.
The output driverhgre a high pulse current
buffer stage designed for minimum driver cross-con
duction. Propagation delays are matched to simplify
use at high frequencies. The floating channels can
be used to drive N-channel power MOSFETs or
IGBTs in the high side configuration which operate
up to 400 volts.
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to Vso. The Thermal Resistance and Power Dissipation ratings are
measured under board mounted and still air conditions.
Symbol
Parameter
Min.
Max. Units
VB1,2,3
VS1,2,3
VHO1,2,3
VCC
VSO
VLO1,2,3
VIN
VFLT
VCAO
VCA-
dVS/dt
PD
RthJA
Tj
TS
TL
High Side Floating Supply Absolute Voltage
High Side Floating Supply Offset Voltage
High Side Output Voltage
Low Side Fixed Supply Voltage
Low Side Driver Return
Low Side Output Voltage
Logic Input Voltage (HIN, LIN & SD)
Fault Output Voltage
Operational Amplifier Output Voltage
Operational amplifier Inverting Input Voltage
Allowable Offset Supply Voltage Transient (Fig. 16)
Package Power Dissipation @ TA< = 25°C (Fig. 19)
Thermal Resistance, Junction to Ambient
Junction Temperature
Storage Temperatue
Lead Temperature (Soldering, 10 seconds)
Weight
-0.3
VSO - 5
VS1,2,3 - 0.3
-0.3
VS1,2,3 + 20
VSO + 400
VS1,2,3 + 0.3
20
-5
VSO - 0.3
-0.3
-0.3
-0.3
-0.3
—
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
50
—
1.5
—
70
-55
125
-55
150
—
300
6.1 (typical)
V
V/nS
W
°C/W
°C
g
www.irf.com
1
05/02/11