IR2130DSCB Datasheet, PDF (1/21 Pages) International Rectifier – Undervoltage lockout for all channels

PD-60022B
IR2130D
Features
n Hermetic
n Floatingchanneldesignedforbootstrap
operation
Fully operational to +400V
Tolerant to negative transient voltage
dV/dt immune
n Gate drive supply range from 10 to 20V
n Undervoltage lockout for all channels
n Over-current shutdown turns off all six drivers
n Independent half-bridge drivers
n Matched propagation delay for both channels
n Outputs in phase with inputs
Description
The IR2130D is a high voltage, high speed power MOSFET
and IGBT driver with three independent high and low side
referenced output channels. Proprietary HVIC technology
enables ruggedized monolithic construction. Logic inputs
are compatible with 5V CMOS or LSTTL outputs. A ground-
referenced operational amplifier provides analog feedback
of bridge current via an external current sense resistor. A
current trip function which terminates all six outputs is also
derived from this resistor.
3-PHASE DRIVER
Product Summary
V_OFFSET
400V max.
I_O+/-
200 mA / 420 mA
V_OUT
10 - 20V
t_on/off (typ.) 675 & 425 ns
Deadtime (typ.)
0.9 µs
An open drain FAULT signal indicates if an over-
current or undervoltage shutdown has occurred.
The output driverhgre a high pulse current
buffer stage designed for minimum driver cross-con
duction. Propagation delays are matched to simplify
use at high frequencies. The floating channels can
be used to drive N-channel power MOSFETs or
IGBTs in the high side configuration which operate
up to 400 volts.
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage param-
eters are absolute voltages referenced to Vso. The Thermal Resistance and Power Dissipation ratings are measured
under board mounted and still air conditions.
Symbol
Parameter
Min.
Max. Units
V_B1,2,3
V_S1,2,3
V_HO1,2,3
V_CC
V_SO
V_LO1,2,3
V_IN
V_FLT
V_CAO
V_CA-
dVS/dt
P_D
R_thJA
T_j
T_S
T_L
High Side Floating Supply Absolute Voltage
High Side Floating Supply Offset Voltage
High Side Output Voltage
Low Side Fixed Supply Voltage
Low Side Driver Return
Low Side Output Voltage
Logic Input Voltage (HIN, LIN & SD)
Fault Output Voltage
Operational Amplifier Output Voltage
Operational amplifier Inverting Input Voltage
Allowable Offset Supply Voltage Transient (Fig. 16)
Package Power Dissipation @ TA< = 25°C (Fig. 19)
Thermal Resistance, Junction to Ambient
Junction Temperature
Storage Temperatue
Lead Temperature (Soldering, 10 seconds)
Weight
-0.3
V_SO - 5
V_S1,2,3 - 0.3
-0.3
V_S1,2,3 + 20
V_SO + 400
V_S1,2,3 + 0.3
20
-5
V_SO - 0.3
-0.3
-0.3
-0.3
-0.3
—
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
V_CC + 0.3
50
—
1.5
—
70
-55
125
-55
150
—
300
6.1 (typical)
V
V/nS
W
°C/W
°C
g
www.irf.com
1
3/1/00