IR21141SSPBF_09 Datasheet, PDF (1/34 Pages) International Rectifier – HALF-BRIDGE GATE DRIVER IC

Data Sheet No. PD60349 revL
IR21141SSPbF/IR22141SSPbF
HALF-BRIDGE GATE DRIVER IC
Features
• Floating channel up to 600 V or 1200 V
• Soft over-current shutdown
• Synchronization signal to synchronize shutdown with the other phases
• Integrated desaturation detection circuit
• Two stage turn on output for di/dt control
• Separate pull-up/pull-down output drive pins
• Matched delay outputs
• Undervoltage lockout with hysteresis band
• Lead free
Description
The IR21141/IR22141 gate driver family is suited to drive a single half bridge
in power switching applications. These drivers provide high gate driving
capability (2 A source, 3 A sink) and require low quiescent current, which
allows the use of bootstrap power supply techniques in medium power
systems. These drivers feature full short circuit protection by means of power
transistor desaturation detection and manage all half-bridge faults by
smoothly turning off the desaturated transistor through the dedicated soft
shutdown pin, therefore preventing over-voltages and reducing
electromagnetic emissions. In multi-phase systems, the IR21141/IR22141
drivers communicate using a dedicated local network (SY_FLT and
FAULT/SD signals) to properly manage phase-to-phase short circuits. The
system controller may force shutdown or read device fault state through the
3.3 V compatible CMOS I/O pin (FAULT/SD). To improve the signal immunity
from DC-bus noise, the control and power ground use dedicated pins
enabling low-side emitter current sensing as well. Undervoltage conditions in
floating and low voltage circuits are managed independently.
Product Summary
VOFFSET
IO+/- (min)
VOUT
Deadtime matching (max)
Deadtime (typ)
Desat blanking time (typ)
DSH, DSL input voltage
threshold (typ)
Soft shutdown time (typ)
600 V or
1200 V max.
1.0 A / 1.5 A
10.4 V – 20 V
75 ns
330 ns
3 µs
8.0 V
9.25 µs
Package
24-Lead SSOP
Typical connection
www.irf.com
14-Aug-09
1
© 2009 International Rectifier