IR2010STRPBF Datasheet, PDF (1/17 Pages) International Rectifier – Floating channel designed for bootstrap operation

Data Sheet No. PD60195-E
IR2010(S)(TR) & (PbF)
Features
HIGH AND LOW SIDE DRIVER
· Floating channel designed for bootstrap operation ^{Product Summary}
Fully operational to 200V
Tolerant to negative transient voltage, dV/dt immune
· Gate drive supply range from 10 to 20V
V_OFFSET
200V max.
· Undervoltage lockout for both channels
· 3.3V logic compatible
I_O+/-
3.0A / 3.0A typ.
Separate logic supply range from 3.3V to 20V
Logic and power ground ±5V offset
· CMOS Schmitt-triggered inputs with pull-down
· Shut down input turns off both channels
· Matched propagation delay for both channels
· Outputs in phase with inputs
· Also available LEAD-FREE
V_OUT
t_on/off
Delay Matching
10 - 20V
95 & 65 ns typ.
15 ns max.
Applications
· Audio Class D amplifiers
· High power DC-DC SMPS converters
· Other high frequency applications
Description
The IR2010 is a high power, high voltage, high speed power MOSFET and IGBT
drivers with independent high and low side referenced output channels, ideal for
Audio Class D and DC-DC converter applications. Logic inputs are compatible with
standard CMOS or LSTTL output, down to 3.0V logic. The output drivers feature a high
pulse current buffer stage designed for minimum driver cross-conduction. Propaga-
tion delays are matched to simplify use in high frequency applications. The floating
channel can be used to drive an N-channel power MOSFET or IGBT in the high side
configuration which operates up to 200 volts. Proprietary HVIC and latch immune
CMOS technologies enable ruggedized monolithic construction.
Packages
14-Lead PDIP
16-Lead SOIC
Typical Connection
200V
HO
V_DD
V_DD
V_B
HIN
HIN
V_S
SD
SD
LIN
LIN
V_CC
V_SS
V_SS
COM
V_CC
LO
(Refer to Lead Assignments for correct configuration). This/These diagram(s) show electrical connections
only. Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
TO
LOAD
1