IR1H40CSP Datasheet, PDF (1/6 Pages) International Rectifier – Flipky - 1 Amp

Flipky^TM
Features
z Ultra Low V_F per Footprint Area
z Low Leakage
z Low Thermal Resistance
z One-fifth Footprint of SMA
z Super Low Profile (<.8mm)
z Available Tested on Tape & Reel
Bulletin I0149J rev. E 06/05
IR1H40CSP
1 Amp
Flipky^TM
Major Ratings and Characteristics
Characteristics
IR1H40CSP Units
I_F(AV) Rectangularwaveform
1.0
A
V_RRM
40
V
I_FSM @ tp = 5 µs sine
250
A
V_F @1.0Apk,T_J=125°C
0.42
V
T_J range
- 55 to 150
°C
Description
True chip-scale packaging is available from International
Rectifier. The IR1H40CSP surface-mount Schottky rectifier
has been designed for applications requiring low forward
drop and very small foot prints on PC boards. Typical
applications are in disk drives, switching power supplies,
converters, free-wheeling diodes, battery charging, and
reverse battery protection.
z Small foot print, surface mountable
z Low forward voltage drop
z High frequency operation
z Guard ring for enhanced ruggedness and long term
reliability
The Flipky^TM package, is one-fifth the footprint of a
comparable SMA package and has a profile of less then
.8mm. Combined with the low thermal resistance of the die
level device, this makes the Flipky^TM the best device for
application where printed circuit board space is at a
premium and in extremely thin application environments
such as battery packs, cell phones and PCMCIA cards.
www.irf.com
1