IR140CSP Datasheet, PDF (1/5 Pages) International Rectifier – Flipky

Flipky^TM
Features
z Ultra Low V_F per Footprint Area
z Low Thermal Resistance
z One-fifth Footprint of SMA
z Super Low Profile (<.8mm)
z Available Tested on Tape & Reel
Bulletin I0148J rev. C 03/04
IR140CSP
1 Amp
Flipky^TM
Major Ratings and Characteristics
Characteristics
IR140CPS Units
I_F(AV) Rectangular waveform
1.0
A
V_RRM
40
V
I_FSM @ tp = 5 µs sine
250
A
V_F @ 1.0 Apk, T_J=125°C
0.38
V
T_J range
- 55 to 150
°C
Description
True chip-scale packaging is available from International
Rectifier. The IR140CPS surface-mount Schottky
rectifier has been designed for applications requiring low
forward drop and very small foot prints on PC boards.
Typical applications are in disk drives, switching power
supplies, converters, free-wheeling diodes, battery
charging, and reverse battery protection.
z Small foot print, surface mountable
z Low forward voltage drop
z High frequency operation
z Guard ring for enhanced ruggedness and long term
reliability
The Flipky^TM package, is one-fifth the footprint of a
comparable SMA package and has a profile of less then
.8mm. Combined with the low thermal resistance of the
die level device, this makes the Flipky^TM the best device
for application where printed circuit board space is at a
premium and in extremely thin application environments
such as battery packs, cell phones and PCMCIA cards.
www.irf.com
1