IR1155S_15 Datasheet, PDF (1/21 Pages) International Rectifier – PROGRAMMABLE FREQUENCY, ONE CYCLE CONTROL PFC IC

Feb 28, 2011
IR1155S
PROGRAMMABLE FREQUENCY, ONE CYCLE CONTROL PFC IC
Features
• PFC IC with IR proprietary “One Cycle Control”
• Continuous conduction mode boost type PFC
• Programmable switching frequency (48k-200kHz)
• Average current mode control
• Output overvoltage protection
• Open loop protection
• Cycle by cycle peak current limit
• VCC under voltage lockout
• Programmable soft start
• Micropower startup
• User initiated micropower “Sleep Mode”
• OVP/EN pin internal filtering for higher noise immunity
• 1.5A peak gate drive
• Latch immunity and ESD protection
Description
The μPFC IR1155 power factor correction IC, based on IR proprietary "One
Cycle Control" (OCC) technique, provides for high PF, low THD and
excellent DC Bus regulation while enabling drastic reduction in component
count, PCB area and design time as compared to traditional solutions. The
IC is designed to operate in continuous conduction mode Boost PFC
converters with average current mode control over 85-264VAC input line
voltage range. Switching frequency can be programmed to anywhere
between 48kHz to 200kHz based on the specific application requirement.
In addition, IR1155 offers several advanced system-enabling and protective
features such as dedicated pin for over voltage protection, cycle by cycle
peak current limitation, open loop protection, V_CC UVLO, soft-start and
micropower startup/sleep-mode with IC current consumption less than
200µA. The sleep mode, invoked by pulling the OVP/EN pin low, enables
compliance with standby power requirements mandated by regulations
such as Energy Star, Green Power, Blue Angel etc.
Package
IR1155 Application Diagram
AC LINE
-
+
VOUT
AC NEUTRAL
1 _{COM GATE} 8
2 _{FREQ VCC} 7
VCC
3 _{ISNS VFB} 6
4 _{OVP COMP} 5
IR1155S
RTN
www.irf.com
© 2011 International Rectifier