IR0530CSP Datasheet, PDF (1/5 Pages) International Rectifier – FlipKY 0.5Amp, 30Volt

Preliminary Data Sheet I0174J rev. A 06/05
FlipKY^TM
Features
• Ultra Low V_F To Footprint Area
• Very Low Profile (<0.6mm)
• Low Thermal Resistance
• Supplied Tested And On Tape & Reel
Applications
• Reverse Polarity Protection
• Current Steering
• Freewheeling
• Flyback
• Oring
IR0530CSP
0.5 Amp
30 Volt
FlipKY^TM
Major Ratings and Characteristics
Characteristics
I_F(AV) Rectangular waveform
V_RRM
I_FSM @ tp = 5 µs sine
V_F @ 0.5 Apk, T_J=125°C
T_J range
IR0530CSP
0.5
30
190
0.33
- 55 to 150
Units
A
V
A
V
°C
Description
International Rectifier's FlipKY product family utilizes wafer level chip scale packaging to deliver Schottky diodes with
the lowest V_F to PCB footprint area in industry. The three pad 0.9mm x 1.2mm devices can deliver up to 0.5A and
occupy only 1.08mm² of board space. The anode and cathode connections are made through solder bump pads on
one side of the silicon rather than through protruding leads enabling designers to strategically place the diodes on the
PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can
improve overall circuit efficiency.
Typical applications include hand-held, portable equipment such as cell phones, MP3 players, PDAs, and portable hard
disk drives where space savings and performance are crucial.
www.irf.com
1