IP1206PBF Datasheet, PDF (1/30 Pages) International Rectifier – Synchronous Buck Multiphase Optimized LGA Power Block

PD-60319
iP1206PbF
Features
Synchronous Buck
Multiphase Optimized LGA Power Block
Integrated Power Semiconductors, PWM Control, & Passives
• Input voltage range of 7.5V to 14.5V
• Output voltage range of 0.8V to 5.5V
• Output voltage accuracy of +/-1%
• Output current range of 0A to 30A
• Operation up to 600kHz
• Lossless current limit
• Output overvoltage protection
• Pre-Bias start-up
• External synchronization
• Output voltage tracking
• Output voltage sequencing
• Over temperature protection
Applications
• Embedded Telecom Systems
• Distributed Point of Load Power
Architectures
• Powering Dual Voltage ASICs
• Microprocessor Power Supplies
• General DC/DC Converters
Package
Description
iP1206PbF
iP1206TRPbF
Interface
Parts
Connection Per Bag
LGA
10
LGA
-
Parts
Per
Reel
-
750
T&R
Orientation
Fig. 29
Description
The iP1206 is a fully optimized solution for medium
current synchronous buck applications. The iP1206
can be configured as a dual output voltage power
supply delivering up to 15A of current per output.
Alternatively, the iP1206 can be configured as a
single output voltage power supply delivering up to
30A of current. In both cases, the power stages are
operated 180º out of phase. This reduces the
amount of input RMS current and lessens the
quantity of input capacitors needed.
iPOWIR Technology offers designers an innovative
board space saving solution for applications
requiring high power densities. iPOWIR technology
eases design for applications where component
integration offers benefits in performance and
functionality. iPOWIR technology solutions are also
optimized internally for layout, heat transfer, and
component selection.
Typical Application
Dual Output
Single Output
www.irf.com
2/26/2008
1