|
HFA30TA60CPBF Datasheet, PDF (1/6 Pages) International Rectifier – Ultrafast, Soft Recovery Diode | |||
|
PD-95689
HFA30TA60CPbF
HEXFREDTM
Features
Ultrafast, Soft Recovery Diode
 Ultrafast Recovery
 Ultrasoft Recovery
 Very Low IRRM
 Very Low Qrr
 Guaranteed Avalanche
 Specified at Operating Conditions
 Lead-Free
Benefits
 Reduced RFI and EMI
1
 Reduced Power Loss in Diode and Switching
Transistor
 Higher Frequency Operation
 Reduced Snubbing
 Reduced Parts Count
Description
2
VR = 600V
VF(typ.)* = 1.2V
IF(AV) = 15A
Qrr (typ.)= 80nC
IRRM (typ.) = 4.0A
trr(typ.) = 19ns
3 di(rec)M/dt (typ.)* = 160A/µs
International Rectifier's HFA30TA60C is a state of the art center tap ultra fast
recovery diode. Employing the latest in epitaxial construction and advanced
processing techniques it features a superb combination of characteristics
which result in performance which is unsurpassed by any rectifier previously
available. With basic ratings of 600 volts and 15 amps per Leg continuous
current, the HFA30TA60C is especially well suited for use as the companion
diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the
HEXFRED product line features extremely low values of peak recovery current
(IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of
recovery. The HEXFRED features combine to offer designers a rectifier with
lower noise and significantly lower switching losses in both the diode and the
switching transistor. These HEXFRED advantages can help to significantly
reduce snubbing, component count and heatsink sizes. The HEXFRED
HFA30TA60C is ideally suited for applications in power supplies and power
conversion systems (such as inverters), motor drives, and many other similar
applications where high speed, high efficiency is needed.
TO-220AB
Absolute Maximum Ratings (per Leg)
VR
IF @ TC = 25°C
IF @ TC = 100°C
IFSM
IFRM
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Parameter
Cathode-to-Anode Voltage
Continuous Forward Current
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
600
15
150
60
74
29
-55 to +150
Units
V
A
W
C
* 125°C
www.irf.com
1
10/19/04
|
▷ |