EMP50P12B Datasheet, PDF (1/15 Pages) International Rectifier – PIM+

Bulletin I27148 08/06
EMP50P12B
PIM+
EMP Features:
Package:
Power Module:
• NPT IGBTs 50A, 1200V
• 10us Short Circuit capability
Square RBSOA
Low Vce(on) (2.15Vtyp @ 50A, 25°C)
Positive Vce(on) temperature coefficient
• Gen III HexFred Technology
Low diode VF (1.78Vtyp @ 50A, 25°C)
Soft reverse recovery
• 2mΩ sensing resistors on all phase outputs and DCbus
EMP – Inverter (EconoPack 2 outline compatible)
minus rail
T/C < 50ppm/°C
Power Module schematic:
Description
The EMP50P12B is a Power Integrated Module for Motor
Driver applications with embedded sensing resistors on all
three-phase output currents.
Each sensing resistor’s head is directly bonded to an external
pin to reduce parasitic effects and achieve high accuracy on
feedback voltages.
Since their thermal coefficient is very low, no value
compensation is required across the complete operating
temperature range.
The device comes in the EMP^TM package, fully compatible in
length, width and height with EconoPack 2 outline.
Three phase inverter with current sensing
resistors on all output phases
Power module frame pins mapping
www.irf.com
1