|
AUIRGS30B60K Datasheet, PDF (1/15 Pages) International Rectifier – INSULATED GATE BIPOLAR TRANSISTOR | |||
|
PD - 96334
AUTOMOTIVE GRADE
AUIRGS30B60K
INSULATED GATE BIPOLAR TRANSISTOR
Features
⢠Low VCE(on) Non Punch Through IGBT Technology
⢠10µs Short Circuit Capability
⢠Square RBSOA
⢠Positive VCE(on) Temperature Coefficient
⢠Maximum Junction Temperature rated at 175°C
⢠Lead-Free, RoHS Compliant
⢠Automotive Qualified *
AUIRGSL30B60K
C
G
E
n-channel
VCES = 600V
IC = 50A, TC=100°C
at TJ=175°C
tsc > 10µs, TJ=150°C
VCE(on) typ. = 1.95V
Benefits
⢠Benchmark Efficiency for Motor Control
⢠Rugged Transient Performance
⢠Low EMI
⢠Excellent Current Sharing in Parallel Operation
D2Pak
TO-262
AUIRGS30B60K AUIRGSL30B60K
G
C
E
Absolute Maximum Ratings
Gate
Collector
Emitter
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the
device. These are stress ratings only; and functional operation of the device at these or any other condition
beyond those indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions
for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise
specified
Parameter
VCES
Collector-to-Emitter Voltage
IC @ TC = 25°C Continuous Collector Current
IC @ TC = 100°C Continuous Collector Current
ICM
ILM
Pulse Collector Current (Ref.Fig.C.T.5)
 Clamped Inductive Load current
VISOL
RMS Isolation Voltage, Terminal to Case, t=1 min.
VGE
Gate-to-Emitter Voltage
PD @ TC = 25°C Maximum Power Dissipation
PD @ TC = 100°C Maximum Power Dissipation
TJ
Operating Junction and
TSTG
Storage Temperature Range
Soldering Temperature, for 10 sec.
Max.
600
78
50
120
120
2500
±20
370
180
-55 to +175
300 (0.063 in. (1.6mm) from case)
Units
V
A
V
W
°C
Thermal / Mechanical Characteristics
Parameter
Min.
RθJC
Junction-to-Case- IGBT
âââ
RθCS
Case-to-Sink, flat, greased surface
âââ
RθJA
dÃÃ Junction-to-Ambient (PCB Mount, Steady State)
âââ
Wt
Weight
âââ
Typ.
âââ
0.50
âââ
1.44
Max.
0.41*
âââ
40
âââ
Units
°C/W
g
* RθJC (end of life) = 0.65°C/W. This is the maximum measured value after 1000 temperature cycles from -55 to 150°C
and is accounted for by the physical wearout of the die attach medium.
www.irf.com
1
10/14/10
|
▷ |