|
AUIRGP35B60PD Datasheet, PDF (1/13 Pages) International Rectifier – WARP2 SERIES IGBT WITH ULTRAFAST SOFT RECOVERY DIODE | |||
|
PD - 97675
AUTOMOTIVEGRADE AUIRGP35B60PD
WARP2 SERIES IGBT WITH
ULTRAFAST SOFT RECOVERY DIODE
Features
⢠NPT Technology, Positive Temperature Coefficient
⢠Lower VCE(SAT)
⢠Lower Parasitic Capacitances
⢠Minimal Tail Current
⢠HEXFRED Ultra Fast Soft-Recovery Co-Pack Diode
⢠Tighter Distribution of Parameters
⢠Higher Reliability
⢠Lead-Free, RoHS Compliant
⢠Automotive Qualified*
C
G
E
n-channel
VCES = 600V
VCE(on) typ. = 1.85V
@ VGE = 15V IC = 22A
Equivalent MOSFET
ParametersÂ
RCE(on) typ. = 84mΩ
ID (FET equivalent) = 35A
Applications
⢠PFC and ZVS SMPS Circuits
⢠DC/DC Converter Charger
Benefits
⢠Parallel Operation for Higher Current Applications
⢠Lower Conduction Losses and Switching Losses
⢠Higher Switching Frequency up to 150kHz
G
Gate
E
C
G
TO-247AC
AUIRGP35B60PD
C
Collector
E
Emitter
Absolute Maximum Ratings
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only; and
functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. Exposure to absolute-
maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under
board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
Parameter
Max.
Units
VCES
IC @ TC = 25°C
IC @ TC = 100°C
ICM
ILM
IF @ TC = 25°C
IF @ TC = 100°C
IFRM
VGE
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Collector-to-Emitter Voltage
Continuous Collector Current
Continuous Collector Current
Pulse Collector Current (Ref. Fig. C.T.4)
d Clamped Inductive Load Current
Diode Continous Forward Current
Diode Continous Forward Current
e Maximum Repetitive Forward Current
Gate-to-Emitter Voltage
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Soldering Temperature for 10 sec.
Mounting Torque, 6-32 or M3 Screw
600
V
60
34
120
120
A
40
15
60
±20
V
308
W
123
-55 to +150
°C
300 (0.063 in. (1.6mm) from case)
10 lbf·in (1.1 N·m)
Thermal Resistance
Parameter
Min.
Typ.
Max.
Units
RθJC (IGBT)
RθJC (Diode)
RθCS
RθJA
Thermal Resistance Junction-to-Case-(each IGBT)
Thermal Resistance Junction-to-Case-(each Diode)
Thermal Resistance, Case-to-Sink (flat, greased surface)
Thermal Resistance, Junction-to-Ambient (typical socket mount)
Weight
âââ
âââ
0.41
âââ
âââ
1.7
âââ
0.50
âââ
âââ
âââ
40
âââ
6.0 (0.21)
âââ
°C/W
g (oz)
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
05/10/11
|
▷ |