AUIR3320S_15 Datasheet, PDF (1/15 Pages) International Rectifier – LOW EMI CURRENT SENSE HIGH SIDE SWITCH

Automotive grade
AUIR3320S
LOW EMI CURRENT SENSE HIGH SIDE SWITCH
Features
Load current feedback
Programmable over current shutdown
Active clamp
ESD protection
Input referenced to Vcc
Over temperature shutdown
Switching time optimized for low EMI
Reverse battery protection
Lead-Free, Halogen-Free, RoHS compliant
Description
The AUIR3320(S) is a fully protected 4 terminals high side
switch. The input signal is referenced to Vcc. When the
input voltage Vcc - Vin is higher than the specified
threshold, the output power Mosfet is turned on. When the
Vcc - Vin is lower than the specified Vil threshold, the
output Mosfet is turned off. A current proportional to the
power Mosfet current is sourced to the Ifb pin. Over
current shutdown occurs when Vifb-Vin > 4.7V. The
current shutdown threshold is adjusted by selecting the
proper RIfb. Either over current and over temperature
latches off the switch. The device is reset by pulling the
input pin high. Other integrated protections (ESD, reverse
battery, active clamp) make the switch very rugged in
automotive environment.
Product Summary
Rds(on)
4 m max.
Vcc op.
6 to 26V
Current Ratio
6000
Prog. Ishutdown 10 to 55A
Vclamp
40V
Packages
D²Pak
Pin 4 and 5 fused
AUIR3320S
Ordering Information
Base Part Number _{Package Type}
AUIR3320S
D2-Pak-5-Leads
Standard Pack
Form
Tube
Tape and reel left
Tape and reel right
Quantity
50
800
800
Complete Part Number
AUIR3320S
AUIR3320STRL
AUIR3320STRR
1 www.irf.com © 2012 International Rectifier
August, 13th 2012