30WQ06FN Datasheet, PDF (1/6 Pages) International Rectifier – SCHOTTKY RECTIFIER

SCHOTTKY RECTIFIER
Bulletin PD-20522 rev. E 03/03
30WQ06FN
3.5 Amp
Major Ratings and Characteristics
Characteristics
30WQ06FN Units
I_F(AV) Rectangular
waveform
V_RRM
I_FSM @ tp = 5 µs sine
3.5
A
60
V
490
A
V_F @3 Apk, T_J = 125°C
0.53
V
T_J
- 40 to 150 °C
Description/ Features
D-Pak (TO-252AA)
The 30WQ06FN surface mount Schottky rectifier has been
designed for applications requiring low forward drop and
small foot prints on PC board. Typical applications are in disk
drives, switching power supplies, converters, free-wheeling
diodes, battery charging, and reverse battery protection.
Popular D-PAK outline
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
6.73 (0.26)
6.35 (0.25)
5.46 (0.21)
5.21 (0.20)
4
2.38 (0.09)
2.19 (0.08)
1.27 (0.05)
0.88 (0.03)
1.64 (0.02)
6.22 (0.24)
5.97 (0.23)
1
2
3
10.42 (0.41)
9.40 (0.37)
1.52 (0.06)
1.15 (0.04)
2x ^{1.14 (0.04)}
0.76 (0.03)
2.28 (0.09)
2x
3x ^{0.89 (0.03)}
0.64 (0.02)
4.57 (0.18)
1 - Anode
2 - Cathode
3 - Anode
4 - Cathode
1.14 (0.04)
0.89 (0.03)
0.58 (0.02)
0.46 (0.02)
6.45 (0.24)
5.68 (0.22)
MINIMUM RECOMMENDED FOOTPRINT
5.97 (0.24)
6.48 (0.26)
10.67 (0.42)
0.51 (0.02)
MIN.
2x
2.54 (0.10)
0.58 (0.02)
0.46 (0.02)
1.65 (0.06)
2x
2.28 (0.09)
2x
Base
Cathode
4, 2
Conform to JEDEC outline D-Pak (Similar to TO-252AA)
Dimensions in millimeters and (inches)
www.irf.com
1
Anode
3
Anode
1