12CWQ10FN Datasheet, PDF (1/6 Pages) International Rectifier – SCHOTTKY RECTIFIER

SCHOTTKY RECTIFIER
Bulletin PD-20548 rev. F 01/03
12CWQ10FN
12 Amp
Major Ratings and Characteristics
Characteristics
12CWQ10FN Units
I_F(AV) Rectangular
waveform
V_RRM
12
A
100
V
I_FSM @ tp = 5 µs sine
330
A
V_F @6 Apk, T_J = 125°C
0.65
V
(per leg)
T_J range
- 55 to 150
°C
Description/ Features
D-Pak (TO-252AA)
The 12CWQ10FN surface mount, center tap, Schottky rectifier
series has been designed for applications requiring low forward
drop and small foot prints on PC board. Typical applications are
in disk drives, switching power supplies, converters, free-
wheeling diodes, battery charging, and reverse battery
protection.
Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term reliability
6.73 (0.26)
6.35 (0.25)
5.46 (0.21)
5.21 (0.20)
4
2.38 (0.09)
2.19 (0.08)
1.27 (0.05)
0.88 (0.03)
1.64 (0.02)
6.22 (0.24)
5.97 (0.23)
1
2
3
10.42 (0.41)
9.40 (0.37)
1.52 (0.06)
1.15 (0.04)
2x ^{1.14 (0.04)}
0.76 (0.03)
2.28 (0.09)
2x
3x ^{0.89 (0.03)}
0.64 (0.02)
4.57 (0.18)
1 - Anode
2 - Cathode
3 - Anode
4 - Cathode
1.14 (0.04)
0.89 (0.03)
0.58 (0.02)
0.46 (0.02)
6.45 (0.24)
5.68 (0.22)
MINIMUM RECOMMENDED FOOTPRINT
5.97 (0.24)
6.48 (0.26)
10.67 (0.42)
0.51 (0.02)
MIN.
2x
2.54 (0.10)
0.58 (0.02)
0.46 (0.02)
1.65 (0.06)
2x
2.28 (0.09)
2x
Base
Common
Cathode
4
Conform to JEDEC outline D-Pak (Similar to TO-252AA)
Dimensions in millimeters and (inches)
www.irf.com
Anode
2
Common
1 Cathode
3
Anode
1