GP551001001FBLK Datasheet, PDF (3/4 Pages) IRC - a TT electronics Company. – Precision Metal Film Resistors

Thick Film
Metal Glaze™ Resistor
Physical Data
A
B
A
D
Dimension
A
B
C
D
Construction
C
Dimensions (inches and (mm))
GP50
GP55
1.10 ± .08 (28.0 ± 2.0)
1.10 ± .08 (28.0 ± 2.0)
0.13 + .01/-.00 (3.2 + 0.2/-0.0)
0.24 ± .01 (6.0 ± 0.3)
0.018 ± .001 (0.45 ± 0.02)
0.023 ± .002 (0.60 ± 0.05)
0.073 ± .006 (1.85 ± 0.15)
0.09 ± .01 (2.4 ± 0.2)
GP60
1.10 ± .08 (28.0 ± 2.0)
0.33 ± .02 (8.5 ± 0.5)
0.027 ± .002 (0.70 ± 0.05)
0.11 ± .01 (2.8 ± 0.3)
123
4 56
1. COLOR BANDS.
The resistors are permanently color banded for resistance value and tolerance in accordance with EIA specifications.
2. HELIXING.
The units are helixed to a predetermined base to final value ratio to obtain the best TCR, noise and stability characteristics.
3. FILM.
Carbon-film resistors have a homogeneous film of pure carbon deposited by a pyrolitic process at carefully controlled
temperatures.
4. SUBSTRATES.
The substrates are of a proprietary non alkaline ceramic, prepared and processed under exacting conditions to guarantee the
utmost in uniformity and surface characteristics.
5. INSULATION.
The resistors are coated with multiple layers of a baked-on fire-retardant synthetic resin which provides the units with a high
degree of mechanical and electrical protection in the most adverse operating conditions.
6. TERMINATIONS.
Positive contact is provided to the resistance element by precision-made end caps. The lead wires are attached by using
proprietary welding techniques.
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
GP Series Issue October 2008 Sheet 3 of 4