TKC-HVC1206100K-K Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – High Voltage Chip Resistors

High Voltage
Chip Resistors
HVC Series
• Continuous voltages up to 3KV
• Resistance Values from 100KW to 100MW
• Tolerances of ±0.5% to ±10%
• Sn/Pb or Matte Sn wrap-around terminations
• Standard chip sizes available from 1206 to 2512
• Robust thick film construction
Electrical Data
Characteristic
1206
2010
2512
Maximum Rated Voltage¹
Voltage Coefficient of Resistance
Resistance Range (Tolerance)
Power @ 70°C
1000V
2000V
3000V
-25 ppm/V Max.
-15 ppm/V Max.
-5 ppm/V Max.
-15 ppm/V Typ.
-5 ppm/V Typ.
-1.5 ppm/V Typ.
100KW to 10M (±0.5%²,±1%, ±2% ,±5%, ±10%)
10MW to 100MW (±5%, ±10%)
300mW
500mW
1000mW
Operating Temperature
-55°C to +155°C
Thermal Impedance
200°C/W
80°C/W
70°C/W
TCR
±100ppm/°C
Termination
Notes: 1. Voltage Limited to √PxR
2. ±0.5% in 2512 package only
Environmental Data
Wrap-around Sn/Pb or matte Sn with leach resistant Ni barrier
Test
Maximum ∆R
Typical ∆R
Load life at rated power (1000 hours @ 70°C)
0.50%
0.25%
Overload (6.25 X rated power for 2 seconds)
0.50%
0.10%
High temperature storage (1000 hours @ 155°C)
0.50%
0.20%
Moisture resistance
0.50%
0.25%
Thermal shock
0.25%
0.05%
Resistance to soldering heat
0.25%
0.05%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TTelectronics plc
PWC Series Issue July 2008