English
Language : 

MWR-MWC01SC-01-50R0-K Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – TaNFilm Microwave Chip Resistor
TaNFilm® Microwave
Chip Resistor
MWR Series
• Long life self passivating TaNFilm® element
• Low absolute TCR to ±25ppm/°C
• Performance characterized to 40GHz
• Wire-bonded, ribbon-bonded or solder mounted
• Flip chip mounting – keeps resistor element in the same plane as circuit
IRC Advanced Film Division
The MWR series is specifically designed for transmission line termination
at high frequencies. Characterized for high frequency performance to 40GHz, the MWR series provides
superior terminator performance to generic “off-the-shelf” chip resistors.
Constructed with IRC’s proprietary TaNFilm® self passivating thin film resistive element, the MWR series chips
possess the rugged environmental characteristics proven through decades of the most demanding military,
space, telecommunications, computer, medical and networking applications.
Available with a choice of solderable or bondable termination finishes, the MWR series termination chips are
suitable for solder attachment as well as chip and wire or ribbon attached hybrid circuits. Back side mounting
is facilitated by an optional gold finish.
For demanding microwave/RF transmission line termination applications in harsh environments, select the
IRC MWR series of high frequency termination chips.
Electrical Data
Power Rating
Ohmic Value
40°C
70°C
Available DC Tolerances
Operating Temperature Range
Termination
Substrate
Maximum Operating Voltage
(not to exceed √P x R )
Stray Distributed Capacitance
MWC01
250mW
125mW
50Ω, 75Ω, 100Ω
±10%, ±5%, ±2%, ±1%
-55°C to 100°C
60/40 Sn/Pb
or Gold
99.6% Alumina
50V
<0.05pF
Environmental Data
Test Per MIL-PRF-55342
Performance
Typical Max
Thermal Shock
±0.02% ±0.10%
Low Temperature Operation ±0.01% ±0.05%
Short-time Overload
±0.01% ±0.05%
High Temperature Exposure ±0.03% ±0.10%
Effects of Solder
Moisture Resistance
Life
±0.01% ±0.10%
±0.03% ±0.10%
±0.03% ±0.10%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
MWR Series Issue June 2008 Sheet 1 of 2