MFP16K8GR Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – FLAMEPROOF POWER METAL FILM RESISTORS

FLAMEPROOF POWER
METAL FILM RESISTORS
MFP SERIES
ISO-9001
Registered
• Small size for power rating
• Flameproof protection
ELECTRICAL DATA:
MFP05
MFP1
Power rating at 70°C
Resistance range
Limiting element voltage
TCR
Resistance Tolerance *
Standard Values
watts
watts
volts
ppm/°C
%
0.5
7R5 - 15R0
100
<1 ohm: 0.7>1 ohm:1.0
0.1 - 1M
350
<1 ohm:300 1 ohm-9.1 ohm: 200
>10 ohm:100
1, 2, 5
E24 preferred
Thermal Impedance
°C/watt
150
120
Ambient Temperature
°C
-55 to 155
* Below 1 ohm 5% TOL preferred.
PHYSICAL DATA:
Dimensions (mm) and Weight (g)
Type
L max. D max.
f min.
d nom.
PCB mounting
centers
Min.
bend radius
Wt. nom.
MFP05
3.5
1.8
22.4
0.5
7.6
0.5
0.1
MFP1
6.2
2.3
21.0
0.6
10.2
0.6
0.3
MFP2
10.0
4.0
19.0
0.8
18.4
1.2
0.55
MFP2
2
1R0 - 1M
100
82
Construction:
The resistance element is a precisely controlled thin film of metal alloy on a high purity ceramic core, protected by a
cement coating applied so that terminations remain completely clear. Thsi permits a well-defined body length (clean
lead to clean lead dimension "L".
Terminations:
Material:
Solder coated copper wire
Strength:
The terminations meet the
requirements of IEC 68.2.21.
Solderability:
The terminations meet the
requirements of IEC 115.1 Clause
4.17.3.2.
Marking:
Resistors are color coded with 4 or 5
bands depending on value and
tolerance. IEC colors are used.
Solvent
Resistance:
The body protection and marking are
resistant t oall normal industrial
cleaning solvents suitable for printed
circuits.
Flammability:
The resistor coating will not burn or
emit incandescent particles under any
condition of applied temperature or
power overload.
WIREWOUND AND FILM TECHNOLOGIES DIVISION
1
736 Greenway Road • Boone, North Carolina 28607-1860 • Tel: [phone] • Fax: [phone] • www.irctt.com