HFR-PCS3042PLF-50R0 Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – Split Ground High Power Thin Film Terminators

Split Ground High Power
Thin Film Terminators
PCS-P Series
• High power dissipation to 80W
• High frequency operation to 10GHz
• High heat dissipating double-sided flange
The PCS-P series split ground high power thin film terminator com-
bines the improved heat dissipation of a double-sided flange and the
split ground to give a power rating of up to 80W, while providing excellent high frequency characteristics
from DC to 10GHz. Attaching the flange directly to a heat sink provides improved heat dissipation at a higher
power rating. Typical applications include aerospace, wireless communication, satellites and RF power ampli-
fiers.
Electrical Data
3042P 3060P 3080P
Impedance
50Ω
VSWR
DC to 1.5 GHz
1.6 to 3 GHz
3.1 to 10 GHz
1.1
1.2
1.1
N/A
1.3
N/A
TCR
±50ppm/°C
Power Rating @70°C
1W
1.5W
Max Power Rating
with Heat Sink @65°C
5W
30W
80W
Operating
Temperature Range
-55°C to +125°C
Termination
Matte Tin Finish
100% Sn
Environmental Data
Test Condition
Maximum
Short Time
Overload
2.5 x Rated Voltage,
5 sec.
±0.5% +0.05Ω
Load Life
40°C, 1000 Hours ±1.0% +0.05Ω
Moisture
Resistence
1000 Hours, 40°C
95% RH
±1.0% +0.05Ω
Temperature Cycle
5 Cycles
70°C High, -10°C
Low
±0.5% +0.05Ω
Resistance to
Soldering Heat
250°C, 3 sec. ±0.5% +0.05Ω
Insulation
Resistance
DC 500V, 1 min.
>1,000MΩ
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
PCS-P Series Issue January 2009 Sheet 1 of 2