HFR-PCS3040RLF-50R0 Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – High Power, High Frequency Terminators

High Power,
High Frequency Terminators
PCS-R Series
• Single sided flange style
• Up to 12.5W power dissipation
• High frequency operation to 2.1GHz
Wraparound termination with
non-leaching Nickel barrier
Ultra stable
Tantalum Nitride
resistor film
system
The PCS-R series high power thin film terminator is designed for
termination of RF signals as a surface mount coupler load or other
RF applications. Typical applications include high power RF amplifiers, and
wireless base stations. Higher power dissipation is achieved by attaching a wrap-around flange directly to the
heat sink. The thin film construction provides consistent operational stability over temperature and time.
Electrical Data
Impedance
VSWR
Frequency Range
50Ω
1.1 Max
DC to 2.1GHz
Power Rating @70°C
1W (Max 12.5W)
TCR
Max Heat Sink Temperature
(@ Max Rated Power)
Operating
Temperature Range
Terminations
±50ppm/°C
80°C
-55° to +80°C
Matte Tin Finish
100% Sn
Environmental Data
Test
Test Condition
Maximum
Short Time
Overload
Load Life
Solderability
Rated Voltage x 2.5,
5 sec.
1000 Hours 40°C,
Rated Voltage
235°C, 3 sec.
±0.5% +0.05Ω
±1.0% +0.05Ω
More than
95%
Moisture
Resistance
1000 Hours, 40°C
95% RH
±1.0% +0.05Ω
Temperature
Cycle
5 Cycles
70°C High, -10°C Low
±0.5% +0.05Ω
Resistance to
Soldering Heat
250°C, 10 sec.
±0.5% +0.05Ω
Insulation
Resistance
DC 500V, 1 min.
>1,000MΩ
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
PCS-R Series Issue January 2009 Sheet 1 of 2