HFR-PCH1632LF Datasheet, PDF (1/2 Pages) IRC - a TT electronics Company. – High Frequency Surface Mount Attenuators

High Frequency
Surface Mount Attenuators
PCH1632 Series
• RoHS compliant
• Operation frequency up to 1.5GHz
• Ideal impedance conversion solution
• Low cost surface mount construction
The PCH1632 series impedance converter provides impedance
conversion between the two most common characteristic impedances in
use, 50Ω and 75Ω. The PCH1632 series provides impedance conversion across a frequency bandwidth of DC to
1.5 GHz with an insertion loss of 6dB. Typical applications include telecommunication and networking equipment as
well as applications. Thin film construction provides consistent operational stability over temperature and time.
Electrical Data
Impedance
50Ω /75Ω
Insertion Loss
6 ± 0.3dB
Frequency Range
DC to 1.5GHz
Power Rating @70°C
125mW
Operating
Temperature Range
-55°C to +125°C
Terminations
100% Sn
Environmental Data
Test
Test Condition
Maximum
Short Time Overload 2.5 x Rated Voltage, 5 sec. ±0.05dB
Load Life
Moisture Resistance
Temperature Cycle
Resistance to
Soldering Heat
Solderability
1000 Hours 70°C
1000 Hours, 60°C
95% RH
5 Cycles
125°C High, -55°C Low
260°C, 10 sec.
235°C, 3 sec
±0.1dB
±0.1dB
±0.05dB
±0.05dB
More than
95%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
PCH1632 Series Issue February 2009 Sheet 1 of 2