GUS-SS4A-00-1002-J Datasheet, PDF (1/4 Pages) IRC - a TT electronics Company. – Surface Mount SOIC Resistor Networks

Surface Mount SOIC
Resistor Networks
SOIC Series
• Tested for COTS applications
• Both narrow and wide body versions available
• Standard JEDEC 8, 14, 16, and 20 pin packages
• Ultra-stable TaNSil^® resistors on silicon substrates
• RoHS compliant and Sn/Pb terminations available
IRC’s TaNSil^® SOIC resistor networks are the perfect solution for high volume applications that demand a small
wiring board footprint. The .050" lead spacing provides higher lead density, increased component count,
lower resistor cost, and high reliability.
The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-pas-
sivating TaNSil^® resistor film.
The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be
100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC SOIC resistor networks.
Electrical Data
Environmental Data
Resistance Range
10 − 250KΩ
Absolute Tolerance
To ±0.1%
Ratio Tolerance to R1
To ±0.05%
Absolute TCR
To ±25ppm/°C
Tracking TCR
Element Power Rating @ 70°C
Isolated Schematic
Bussed Schematic
Power Rating @ 70°C
SOIC-N Package
Power Rating @ 70°C
SOIC-W Package
Rated Operating_{_}V_{_}o_{_}l_{_}ta_{_}g_{_}e_{__________}
(not to exceed _√Power X Resistance)
To ±5ppm/°C
100mW
50mW
8-Pin
14-Pin
16-Pin
400mW
700mW
800mW
16-Pin
20-Pin
1.2W
1.5W
100 Volts
Operating Temperature
-55°C to +125°C
Noise
<-30dB
Test Per
MIL-PRF-83401
Thermal Shock
Power
Conditioning
High Temperature
Exposure
Short-time
Overload
Low Temperature
Storage
Life
Typical
Delta R
±0.02%
±0.03%
±0.03%
±0.02%
±0.03%
±0.05%
Max
Delta R
±0.1%
±0.1%
±0.05%
±0.05%
±0.05%
±2.0%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
SOIC Series Issue January 2009 Sheet 1 of 4