GUS-QS8A-00-1002-J Datasheet, PDF (1/4 Pages) IRC - a TT electronics Company. – Surface Mount QSOP Resistor Networks

Surface Mount QSOP
Resistor Networks
QSOP Series
• Reliable, no internal cavity
• High resistor density - .025" lead spacing
• Standard JEDEC 16, 20, and 24 pin packages
• Ultra-stable TaNSil^® resistors on silicon substrate
• RoHS compliant and Sn/Pb terminations available
IRC’s TaNSil^® QSOP resistor networks are the perfect solution for high volume applications that demand a
small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component
count, lower resistor cost, and high reliability.
The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s
self-passivating TaNSil^® resistor film.
The QSOP series is ideally suited for the latest surface mount assembly techniques and each lead can be
100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC QSOP resistor networks.
Electrical Data
Resistance Range
Absolute Tolerance
Ratio Tolerance to R1
10 to 250KΩ
To ±0.1%
To ±0.05%
Absolute TCR
To ±25ppm/°C
Tracking TCR
To ±5ppm/°C
Element Power Rating @ 70°C
Isolated Schematic
Bussed Schematic
100mW
50mW
Package Power Rating @ 70°C
16-Pin
20-Pin
24-Pin
750mW
1.0W
1.0W
Rated Operating_{__}V_{_}o_{_}l_{_}ta_{_}ge
(not to exceed √ P x R)
100 Volts
Operating Temperature
-55°C to +125°C
Noise
<-30dB
Environmental Data
Test Per
MIL-PRF-83401
Typical
Delta R
Thermal Shock
±0.02%
Power Conditioning
±0.03%
High Temperature Exposure ±0.03%
Short-time Overload
±0.02%
Low Temperature Storage
±0.03%
Life
±0.05%
Max Delta
R
±0.1%
±0.1%
±0.05%
±0.05%
±0.05%
±2.0%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
QSOP Series Issue January 2009 Sheet 1 of 4